Solidoodle 3
Make/Model
Documentation
Settings
Print Envelope: 200mm x 200mm x 200mm (8“ x 8” x 8“)
ABS Extruder Temperature: 200˚
ABS Bed Temperature: Normally, ABS requires 105C, however, our Solidoodle temperature indicator is off by about +15C. There is a temperature chart taped to the side cover of the printer. Use it!
Software
Repetier Host
Repetier Host is used to control the printer.
Note: There is talk of switching to Printrun. — Pete Prodoehl 2014/04/10 21:55
Slic3r
Slic3r is used to generate G-code from your STL files. Slic3r can be run from within Repetier Host, or you can slice your files separately and load the G-code into Repetier Host.
Note that we've had a few issues with the settings taking effect when slicing within Repetier Host, so if things don't seem to be working, try slicing outside Repetier Host.
Current Status
June 2017: Out of commission for an extended period. Taken out of operation due to mechanical glitch which caused defects in every print.
June 2017: E3D V6 hotend and Titan extruder transfered to TAZ for upgrades.
Location
Approved Trainers
Checked Out Members
If you would like to get checked off to use this machine please contact one of the above listed trainers.
Wade Starck
-
Emily Mondloch
Mykal Antczak
Kaysy
Steve Shapiro
Sean Woodman
Matt Schedler
Luke Schedler
Bret Daniel
-
History
Notes
Paid for by
$70 - Joe B.
$100 - Lance L.
$20 - Pete P.
$100 - Vishal R.
$20 - Harvey M.
-
$200 - Jim K.
$200 - Ed K.
$20 - Chris H.
$50 - Adrian
$20 - Steve P.
$100 - Tony W.
TOTAL PLEDGED: $950