Clean and organize top shelf of hardware bins in Metal Shop.(Started by Rik S.)
Network cables run to New 3D Lab (Completed by Tony W., Marcin, Mark, Eric)
3D Printing moves to Willies old boat area.
Black Shelves from Ladies coat room goes into old 3D area.
White shelves from Cooties room go into Ladies coat room.
Cosplay Group moves into former Cooties room.
Batteries replaced in vault hallway thermostat (Steve Pilon 11/11/17)
Install awnings over the outside doors. (Rik Stardy, Marcin Polewski, Steffanie Maher, and Dan Jonke. Completed 11/5/2017
Replace Batteries in some of the clocks
Projection system needs a new VGA HDMI
Clear out open area in East Room for Maker Faire projects
Get Impound lot ready for raffle in July. (Photos & numbers)
Install an automatic drain on the big tank.- See Tom G .
Install new water cooler- Timothy Campbell did this!
Permanent charging station for the forklift.
Replace gasket/diaphragm in the self-filling water cooler
Come up with scrap metal bins to hold small pieces so they don't spill everywhere.
Find/make chuck jaws for the Logan lathe, or mount a chuck that has both sets of jaws.
Mount a good grinder in the welding area for sharpening TIG electrodes.
Pinball machine repairs, a never ending project
Mount 911 phones by exit doors - See Adrian
Remove manual lock/unlock from alley doors
Fix numeric pad on Door 1 - Royce did this!
Level CNC plasma table - Marc and helpers did this!
Install new pallet racking for member storage shelves - Lots of people helped with this
Make “Park on SAME/OPPOSITE” signs for posting outside on meeting nights - Keith did this
FIX FLASHING - Rick did this!
Check on auto-filling water cooler leak
Remove large format printer
Reorganize the area around the vacuum former, to allow it to be used
Mount the cork board by the desk in the lobby
Some attention should be paid to the small sand blaster window, to see if we can make it more usable
Power column for the conference table in the meeting room - See Tom G. and Adrian V.
SMD rack - make a new rack to hold the SMD component reels, label the strips coming out and capture them so they don't unreel.
Swap out the computers in the Laser cutter room for the dual core machines next to the mini CNC router.
Do something with the VLAT.
Remove the old heater above the back hall from the craft shop so we can hang new lights
Hang new lights in the craft shop hall.
Move the exhaust fan for the laser cutters and duct it.
Gas line for the forge and furnace - Tom, Dan J.
Outlets on the columns in the East room - Tom
Paint exterior door frames where the new doors were installed. Caulk when done. - Dan J., ?
Door stop bollards - mount the big yellow posts to keep the alley doors from swinging too far. - Ed, ?
Mount the curb blocks - drill some holes and pound rods to keep the curb blocks from moving. - Made redundant by bollard installation.
Hang speakers in West Room - Kevin B., Dan J.
Add more tool pegboard in the wood shop and move wood shop tools and half of the duplicate tools from the main pegboard. - Vishal, ChrisH, JimR, others
Power the dust collector in the wood shop - Tom G
Install Air Lines - Joe R. and Chris H.
Clean out Vault 1 and make rentable - Tiffany, Sean
Organize plotters and screen printing and pottery areas - SteveP, Brant, Pete, DL, others
Move shelving into vault hallway - Tiffany, Sean, Brant, etc.
Find a home for the bar - Meh, good enough for now
Hang mirror over wash sink - Brant
Replace the light socket on the vertical band saw.
Fix the 25W laser - find out if its the tube or the power supply.
Power up the 3 headed drill press (only 2 heads left)
Tool pegboard - make something to hold pliers and Allen keys better.
Wash the carpet - try to get out some of the water stains.
PA system/phones - Chris H. (done)
'No paper towels in toilets' sign or stencil for bathrooms - Brant, low priority
Wire Speakers in West Room - Kevin B., Dan J. (some wired up)
Permanent wiring for the Red Dragon - #6 wire and conduit to a panel with open breakers - Tom G.
Permanent air lines for the red dragon - flex air lines - See Tom G>