• Solidoodle 3 3D Printer

• Solidoodle Quick-start
• Solidoodle FAQ
• Solidoodle Tech Support

• Print Envelope: 200mm x 200mm x 200mm (8“ x 8” x 8“)
• ABS Extruder Temperature: 200˚
• ABS Bed Temperature: 110˚

Repetier Host is used to control the printer.

• Repetier Host

• Slic3r

Slic3r is used to generate G-code from your STL files. Slic3r can be run from within Repetier Host, or you can slice your files separately and load the G-code into Repetier Host.

Note that we've had a few issues with the settings taking effect when slicing within Repetier Host, so if things don't seem to be working, try slicing outside Repetier Host.

• OK

• 3D Printing Lab

• Ed C.
• Joseph B.
• Pete P.
• Skittles (Lucy Sinogeikina)

If you would like to get checked off to use this machine please contact one of the above listed trainers.

• …

• 2014-02-25 - Arrived at Makerspace
  

• …

• $70 - Joe B.
• $100 - Lance L.
• $20 - Pete P.
• $100 - Vishal R.
• $20 - Harvey M.
• $50 - Ken B.
• $200 - Jim K.
• $200 - Ed K.
• $20 - Chris H.
• $50 - Adrian
• $20 - Steve P.
• $100 - Tony W.

TOTAL PLEDGED: $950