Differences

This shows you the differences between two versions of the page.

--- equipment:cncmogul [2018/04/08 03:30]
wildapricot-king-dee_billy [Operating Instructions]
+++ equipment:cncmogul [2019/01/23 20:04] (current)
harveym [Current Status]
@@ Line 1: / Line 1: @@
-====== Main Header ======
+====== CNC Mogul ======
 ~~NOTOC~~
 \\
@@ Line 14: / Line 14: @@
 {{:equipment:template:hollowstar.png?20|}} Champion: Ed C.\\
+ ====Current Status ====
+{{:equipment:template:up.png?25|}}
  ==== Make/Model ====
 CNC Mogul
@@ Line 24: / Line 25: @@
- ====Current Status ====
-{{:equipment:template:up.png?25|}}
  ====Location ====
-Information\\
+CNC Room
-Information\\
  ====Needed ====
-  * This is a list
+  * Vacuum Attachment
-  * The second item
+  * Z Height Probe ([[http://7xcnc.com/software/probing/z-touch-plate/|See Here]])
-    * You may have different levels
+  * Simple Pendant ([[http://7xcnc.com/software/linuxcnc/pendant/|See Here]])
-  * Another item
+  * Limit switches
-- The same list but ordered
-  - Another item
-    - Just use indention for deeper levels
-  - That's it
  ====Updates====
-Information\\
-Information\\
  ====History ====
-/2015 - Information\\
+/2014 - Arrived at Milwaukee Makerspace -// check this date//
-/2015 - Information\\
  ====Operating Instructions ====
-{{ :equipment:vcarve_license2.doc |}}
+{{ :equipment:vcarve_license2.doc |}}\\
 {{ :equipment:mogul-procedures_landscape_.pdf |}}
  ====Settings===
-Information\\
-Information\\
  ====Notes ====
-Information\\
+  * The power switch is on the right side of the gantry
-Information\\
+  * Drag the toolhead to home before you power on the machine
+  * Home is at the bottom left of the table
+  * The computer power button is on the front
+  * You can load G-Code via a USB drive or using WiFi and connecting to MakerVault (Use extension .ngc)
+  * If you need WiFi enabled you'll need to type the password (Ask Ed or Steve for the password)
+  * The icon 'Launch CNC Mogul (Modified Home)' launches LinuxCNC
+  * There are currently no limit switches, but if you home it at the bottom left it will use soft limits and not drive the gantry off the end (Hopefully!)
+  * F1 is the soft e-stop button (This is for an "oh shit!" event)
+  * F2 toggles power to the machine (This allows the current command to complete, so it is recoverable)
+  * Arrow keys jog X and Y, page up & page down jog the Z
+  * In LinuxCNC the red rectangle shows the bounds of the work area
+  * Left mouse button drags, middle mouse button rotates, right mouse button zooms
+  * Use the 'touch off' feature to set tool head on your stock (touch off sets your 0,0,0)
  ==== Documentation ====
@@ Line 66: / Line 67: @@
  ====Software====
+* For 2.5D you can use [[http://www.cambam.info/|CamBam]] or [[http://www.makercam.com/|MakerCam]] to generate G-Code\\
+* For 3D stuff you can use [[http://pycam.sourceforge.net/|pyCAM]] which can load STL files
 ~~BARCODE~class=barcode_right~~

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools