User Tools

Site Tools


equipment:tablesaw3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:tablesaw3 [2018/01/17 18:15]
spilon [History]
equipment:tablesaw3 [2018/01/17 18:18] (current)
spilon [History]
Line 42: Line 42:
  
 ===== History ===== ===== History =====
-2018-1-15 - Replaced arbor, motor bearings and belts. Completely dismantled the internals of the saw down to the raw cabinet. Honed and polished the bearing surface for raising and lowering the blade. Rebuilt the locks for blade height and tilt angle. Replaced cord from the power box to the motor, wire insulation was cracked and missing.\\ ​  +Jan 15, 2018 - Replaced arbor, motor bearings and belts. Completely dismantled the internals of the saw down to the raw cabinet. Honed and polished the bearing surface for raising and lowering the blade, can now adjust height and tilt blade with two fingers, it used to take two hands. Rebuilt the locks for blade height and tilt angle. Replaced cord from the power box to the motor, wire insulation was cracked and missing.\\ ​  
-12-01-2017ish - Installed Vega Pro 50L fence. Tom Gra was returned the original fence in case we ever upgrade to a better saw. \\ +Dec 1, 2017ish - Installed Vega Pro 50L fence. Tom Gra was returned the original fence in case we ever upgrade to a better saw. \\ 
-12-07-2016 - Sprayed internal moving surfaces with dry lubricant. Helped loosen up a bit.\\+Dec 7, 2016 - Sprayed internal moving surfaces with dry lubricant. Helped loosen up a bit.\\
 Jan 7, 2015 - Arrived at Makerspace?​\\ Jan 7, 2015 - Arrived at Makerspace?​\\
  
equipment/tablesaw3.txt · Last modified: 2018/01/17 18:18 by spilon