Differences

This shows you the differences between two versions of the page.

--- equipment:silkscreeningrig [2014/04/08 21:08]
raster [Notes]
+++ equipment:silkscreeningrig [2024/04/03 02:44]
wildapricot-landrum_geoff
@@ Line 1: / Line 1: @@
 ====== Silk Screen Printing Rig ======
 ~~NOTOC~~
-{{ :equipment:silkscreen_rig.jpg?300|}}
+{{ :equipment:screenprint.jpg?400|}}
-{{ :equipment:screenprint.jpg?300|}}
- ===== Make/Model =====
+===== Make/Model =====
   * Richardson Industries, Westerville, OH
   * Includes Model #445 Hot Shot Heater
- =====Specs =====
+=====Specs =====
   * 4 screen holders on rotary wheel
   * 120v/1ph/60Hz, 20 amp heater
- =====Current Status =====
+=====Current Status =====
-OK
+Needs New Platen, Will be built in the woodshop. Screens, Squeegees, Scoop Coaters and Inks all ready to go!
- =====Location =====
+=====Location =====
-Vault Hallway, Lenox
+East Side of Vault Hall, Lenox
- =====On lend from =====
+=====On Lend From =====
 [[members:tomgondek|Tom Gondek]]
 =====History =====
-/05/01 - Arrived at Makerspace\\
+/01/2010 - Arrived at Makerspace\\
-/12/31 - Moved to Lenox\\
+/31/2012 - Moved to Lenox\\
+/23/2017 - Replaced damaged wire nuts and power cord\\
+/01/2022 - Moved to Vault Hall\\
+===== Approved Trainers =====
+  * Champion:
+  * Co-Champion:
+===== Approved Members =====
- =====Notes =====
+=====Notes =====
-  * [[members:peteprodoehl|Pete Prodoehl]] has been appointed Area Champion for the screen printing area. If you have questions, please ask him.
+  * [[members:tomgondek|Tom Gondek]] is an expert user and owns the machine.
-  * [[members:tomgondek|Tom Gondek]] is an expert user, in fact, he owns the machine. :)\\
   * If you're not an expert, please use only water-based inks, not the Plastisol inks!
-  * There are a number of consumables such as ink, tape, spray glue, and possibly vinyl and transfer paper. Please make sure you replenish what you use.
+  * There are a number of consumables such as ink, tape, and transfer paper. Please make sure you replenish what you use/donate to the area and appropriate amount for the space to replenish it with area funds.
   * Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.
+  * Make sure you turn the heater off (and unplug it) when you are done!

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools