User Tools
equipment:silkscreeningrig
This is an old revision of the document!
Silk Screen Printing Rig
Make/Model
- Richardson Industries, Westerville, OH
- Includes Model #445 Hot Shot Heater
Specs
- 4 screen holders on rotary wheel
- 120v/1ph/60Hz, 20 amp heater
Current Status
OK
Location
Vault Hallway, Lenox
On lend from
History
2010/05/01 - Arrived at Makerspace
2012/12/31 - Moved to Lenox
Notes
- Pete Prodoehl has been appointed Area Champion for the screen printing area. If you have questions, please ask him.
- Tom Gondek is an expert user, in fact, he owns the machine. :)
- If you're not an expert, please use only water-based inks, not the Plastisol inks!
- There are a number of consumables such as ink, tape, spray glue, and possibly vinyl and transfer paper. Please make sure you replenish what you use.
- Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.
equipment/silkscreeningrig.1396991316.txt.gz · Last modified: 2014/04/08 21:08 by raster
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
