Milwaukee Makerspace Wiki

User Tools

Site Tools

You are here: start » equipment » silhouettecameo
equipment:silhouettecameo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
equipment:silhouettecameo [2015/12/23 16:02]
raster 		equipment:silhouettecameo [2024/02/25 14:16]
wildapricot-van_groll_casey [Table]
Line 1: Line 1:
 ====== Silhouette Cameo ====== ====== Silhouette Cameo ======
-~~NOTOC~~+ 
 +Note: As of 2017-06-03 we've upgraded to the Silhouette Cameo 3. (Not all info below has been updated.) 
 + 
 {{ :equipment:silhouette.jpg?300|}} {{ :equipment:silhouette.jpg?300|}}
  
 ===== Make/Model ===== ===== Make/Model =====
-  * Silhouette Cameo+  * Silhouette Cameo 3
  
 ===== Approved Trainers ===== ===== Approved Trainers =====
-  * [[members:peteprodoehl|Pete Prodoehl (raster)]] 
   * [[members:alexian|Lexie]]   * [[members:alexian|Lexie]]
-  * [[members:brantholeman:|BrantH]]  +  * [[members:hapto|Hapto]] 
 +  * [[members:Yvonne|Yvonne]] 
 +  * [[members:caseyvangroll|Casey Van Groll]] 
 + 
 + 
 +Demonstration Video: https://youtu.be/cObTif5eNhQ 
 + 
 +How to stick vinyl using transfer tape;  
 +https://youtu.be/9Lpq0YQHqX8
  
  
 ===== Trained Members ===== ===== Trained Members =====
  
-^ Trained                      ^ Trained By  ^ Date         ^ +^ Trained                ^ Trained By  ^ Date          ^ 
-| BenN                         | Pete        | 21-DEC-2013  | +| BenN                   | Pete        | 21-DEC-2013   | 
-| JimK                         | Pete        | 21-DEC-2013  | +| JimK                   | Pete        | 21-DEC-2013   | 
-| AudreyH                      | Pete        | 21-DEC-2013  | +| AudreyH                | Pete        | 21-DEC-2013   | 
-| [[members:chrish|Chris H.]]  | ?           | ?            | +| HarveyM                | Lexie       | 5/6/2014      | 
-| HarveyM                      | Lexie       | 5/6/2014     | +| Kaysy                  | Pete        | 5/31/2014     | 
-| Kaysy                        | Pete        | 5/31/2014    | +| Mykal                  | Pete        | 5/31/2014     | 
-| Mykal                        | Pete        | 5/31/2014    | +| FelishaW               | Lexie       | 8/26/2014     | 
-| FelishaW                     | Lexie       | 8/26/2014    | +| ShaneT                 | Brant       | 9/7/2014      | 
-| ShaneT                       | Brant       | 9/7/2014     | +| AndyK                  | Pete        | 9/12/2014     | 
-| AndyK                        | Pete        | 9/12/2014    | +| TeresaC                | Lexie       | 10/24/2014    | 
-| TeresaC                      | Lexie       | 10/24/2014   | +| Kendra                 | Brant       | 11/28/2014    | 
-| Kendra                       | Brant       | 11/28/2014   | +| KeithM                 | Brant       | 11/28/2014    | 
-| KeithM                       | Brant       | 11/28/2014   | +| LindaSz                | Brant       | 11/28/2014    | 
-| LindaSz                      | Brant       | 11/28/2014   | +| Issac                  | Brant       | 11/28/2014    | 
-| Issac                        | Brant       | 11/28/2014   | +| SteveB                 | Brant       | 11/28/2014    | 
-| SteveB                       | Brant       | 11/28/2014   | +| BradF                  | Lexie       | 12/13/2014    | 
-| BradF                        | Lexie       | 12/13/2014   | +| SamL                   | Lexie       | 12/13/2014    | 
-| SamL                         | Lexie       | 12/13/2014   | +| EllenF                 | Lexie       | 12/13/2014    | 
-| EllenF                       | Lexie       | 12/13/2014   | +| Bill*2                 ^ Lexie       | 28-FEB-2015   | 
-| Bill*2                       ^ Lexie       | 28-FEB-2015  | +| Scott S.               | Lexie       | 28-FEB-2015   | 
-| Scott S.                     | Lexie       | 28-FEB-2015  | +| Rick S.                | Lexie       | 28-FEB-2015   | 
-| Rick S.                      | Lexie       | 28-FEB-2015  | +| Kendra M.              | Lexie       | 28-FEB-2015   | 
-| Kendra M.                    | Lexie       | 28-FEB-2015  |+| Linda S                | Lexie       | 6-MAR-2016    | 
 +| Amy Stanley            | Lexie       | 6-Mar-2016    | 
 +| Sean Evan              | Lexie       | 6-MAR-2016    | 
 +| Faith Herrara          | Pete        | 16-MAR-2016   | 
 +| Barbara J Rehm         | Lexie       | 22-MAR-2016   | 
 +| John Bacik             | Lexie       | 22-MAR-2016   | 
 +| Steffanie Maher        | Lexie       | 22-MAR-2016   | 
 +| DL Swanson             | Lexie       | 22-MAR-2016   | 
 +| Jason Moore            | Lexie       | 22-MAR-2016   | 
 +| Ryan Miller            | Lexie       | 22-MAR-2016   | 
 +| Minoca Thomas          | Lexie       | 22-MAR-2016   | 
 +| John Olson             | Lexie       | 22-MAR-2016   | 
 +| Amy Haffner            | Lexie       | 22-MAR-2016   | 
 +| Bill Coon              | Lexie       | 22-MAR-2016   | 
 +| Todd Gnacinski         | Lexie       | 22-MAR-2016   | 
 +| John Nelson            | Lexie       | 17-MAY-2016   | 
 +| Tim Kern               | Lexie       | 17-MAY-2016   | 
 +| David Arnold           | Lexie       | 17-MAY-2016   | 
 +| Dave Bateman           | Lexie       | 17-MAY-2016   | 
 +| Dale Noll              | Lexie       | 17-MAY-2016   | 
 +| Jonathan Lin           | Lexie       | 17-MAY-2016   | 
 +| Dmitry Krivochenister  | Lexie       | 12-July-2016  | 
 +| Anastasia Kraft        | Lexie       | 12-July-2016  | 
 +| Rainer Wolter          | Pete        | 16-JAN-2018   | 
 +| Joe Baker              | Pete        | 16-JAN-2018   | 
 +| Billy King-Dee         | Pete        | 16-JAN-2018   | 
 +| Tyler Phillips         | Pete        | 16-JAN-2018   | 
 +| Joshua Rolefson        | Pete        | 16-JAN-2018   | 
 +| Amber Jackson          | Pete        | 16-JAN-2018   | 
 +| Maksym Pryhodko        | Pete        | 16-JAN-2018   | 
 +| Mary S.                | Brant       | 27-APR-2018   | 
 +| Lyra C.                | Brant       | 27-APR-2018   | 
 +| Dan B.                 | Brant       | 27-APR-2018   | 
 +| Casey Van Groll        | Hapto       | 30-JAN-2024   | 
 +| Arushi Gupta           | Casey       | 24-FEB-2024   | 
 + 
 + 
 +===== Usage ===== 
 + 
 +  * Member should (at a minimum) bring their own vinyl. There may be small scraps to use, but bring your own rolls or sheets. 
 +  * Members doing a lot of cutting may want to own their own blade and possibly their own cutting mat.
  
  
 ===== Accessories/Consumables ===== ===== Accessories/Consumables =====
  
-These are the extras that were ordered with the additional funds raised.+These are the consumable that should be ordered occasionally.
  
-  * (1) Silhouette Cameo 12-Inch By 24-Inch Cutting Mat +  * Silhouette Cameo 12-Inch By 24-Inch Cutting Mat 
-  * (1) Silhouette Cameo Replacement Cutting Mat +  * Silhouette Cameo Replacement Cutting Mat 
-  * (2) Silhouette Replacement Blades +  * Silhouette Replacement Blades
-  * (1) Silhouette Fabric Blade +
-  * (1) Silhouette Sewable Fabric Interfacing +
-  * (1) Silhouette Clean Cut Fabric Interfacing +
-  * (3) Silhouette Premium Transfer Paper +
-  * (3) Silhouette 12-Inch Premium Vinyl, Black +
-  * (1) Silhouette 12-Inch Premium Vinyl, Dark Red +
-  * (1) Silhouette 12-Inch Premium Vinyl, Leaf Green +
-  * (1) Silhouette 12-Inch Premium Vinyl, Navy +
-  * (2) Silhouette Premium Indoor/Outdoor Vinyl, White +
-  * (1) Silhouette Premium Indoor/Outdoor Vinyl, Orange +
-  * (1) Silhouette Adhesive Vinyl, 9-Inch, Brown +
-  * (1) Silhouette Adhesive Vinyl, 12-Inch, Yellow+
  
  
 ===== Documentation ===== ===== Documentation =====
-  * [[http://www.silhouetteamerica.com/media/docs/technical-specs_cameo.pdf|Silhouette Cameo Specs]] +  * [[https://www.silhcdn.com/m/d/user-guides/cameo-3-en.pdf|Silhouette Cameo 3 User Guide (PDF)]] 
-  * [[http://www.silhouetteamerica.com/media/docs/manual_silhouette-studio_v5.pdf|Silhouette Studio Manual (PDF)]]+  * [[https://cdn.silhouetteamerica.com/m/d/manual_silhouette-studio_v5.pdf|Silhouette Studio Manual (PDF)]]
   * [[http://www.youtube.com/user/SilhouetteAmericaInc/videos|Silhouette YouTube Channel (Video)]]   * [[http://www.youtube.com/user/SilhouetteAmericaInc/videos|Silhouette YouTube Channel (Video)]]
  
Line 75: Line 113:
 ===== Supplies Status ===== ===== Supplies Status =====
 ^ Color          ^ Finish  ^ Width (inches)  ^ On hand   ^ ^ Color          ^ Finish  ^ Width (inches)  ^ On hand   ^
-| Contact paper  | n/a     | 12"             | Nope      |+| Contact paper  | n/a     | 12"             | A little  |
 | Contact paper  | n/a     | Scraps          | Not much  | | Contact paper  | n/a     | Scraps          | Not much  |
 +| Transfer tape  | n/a     | 6.5"            | 1 roll    |
 | White          | Matte   | 9"              | 1 roll    | | White          | Matte   | 9"              | 1 roll    |
 | White          | Matte   | 12"             | 2 rolls   | | White          | Matte   | 12"             | 2 rolls   |
Line 111: Line 150:
   * Craft Lab   * Craft Lab
  
-===== Paid for by ===== +===== Owner ===== 
-  * $175 - Pete (towards cutter and consumables) - PAID +  * Lexie
-  * $50 - Pete (towards consumables) - PAID +
-  * $25 - Bob T. (towards cutter) - PAID +
-  * $20 - Lance (towards cutter) - PAID +
-  * $20 - Dan J. (towards cutter) - PAID +
-  * $50 - Brant (towards cutter and consumables) +
-  * $50 - T3 (towards cutter and consumables) - PAID +
-  * $20 - Joe B. (towards consumables) - PAID +
-  * $20 - Vishal (towards consumables) - PAID +
-  * $20 - Tom Gr. (towards consumables) +
-  * $20 - Royce (towards consumables) - PAID +
-  * $20 - Buggs (towards consumables) - PAID +
-  * $20 - Aaron K. (towards consumables) - PAID +
-  * $?? - jason g. (towards consumables) +
-  * $10 - Robert M. (towards consumables) +
-  * $?? - Adam C. (towards consumables) +
-  * $20 - Bret D. (towards consumables) - PAID +
-  * $20 - Audrey (towards consumables) - PAID +
-  * $20 - Kathy (towards consumables) - PAID +
-  * $20 - Jim K. (towards consumables) +
- +
-**TOTAL PLEDGED: $600**+
  
-**TOTAL COLLECTED: $500** 
  
-**TOTAL SPENT SO FAR: $495** 
  
 (Extra over the needed <del>$250</del> $230 will be used for consumables and spare parts.) (Extra over the needed <del>$250</del> $230 will be used for consumables and spare parts.)
  
 ===== History ===== ===== History =====
-  * 2013-12-18 - Ordered\\ +  * 2017-06-03 - Silhouette 3 Arrived at Makerspace to replace Silhouette 2 
-  * 2013-12-21 - Arrived at Makerspace\\+  * 2013-12-21 - Silhouette 2 Arrived at Makerspace
  
 ===== Notes =====  ===== Notes ===== 
Line 151: Line 167:
   *   * Silhouette Studio 3.0 does not work with Windows XP - Vista or higher.   *   * Silhouette Studio 3.0 does not work with Windows XP - Vista or higher.
   * You can cut things via a computer and USB cable if you use Silhouette Studio, or via an SD card with your files on it. (The SD card is a little bit more tricky.)   * You can cut things via a computer and USB cable if you use Silhouette Studio, or via an SD card with your files on it. (The SD card is a little bit more tricky.)
-  * Remember that if you are cutting vinyl to use for screen printing (involving sticking the vinyl on the //bottom// of the screen) you need to reverse your image! Use the 'Flip Horizontally' command under the 'Object -> Transform' menu.+  * Remember that if you are cutting vinyl to use for screen printing (involving sticking the vinyl on the //bottom// of the screen) you need to reverse your image! Use the 'Flip Horizontally' command under the 'Object -> Transform' menu (or the 'Object-->Mirror' menu).
  
 ===== Blog Posts =====  ===== Blog Posts ===== 
Line 165: Line 181:
   * [[http://blog.inventables.com/2013/10/easy-papercraft-with-silhouette-cameo.html|Easy Papercraft with the Silhouette Cameo]]   * [[http://blog.inventables.com/2013/10/easy-papercraft-with-silhouette-cameo.html|Easy Papercraft with the Silhouette Cameo]]
   * [[https://www.inventables.com/projects/grinch-laptop-sticker|Grinch Laptop Sticker]]   * [[https://www.inventables.com/projects/grinch-laptop-sticker|Grinch Laptop Sticker]]
 +  * [[http://rasterweb.net/raster/2015/05/30/furiosas-skeleton-arm/|Imperator Furiosa’s Skeleton Arm]]
 +  * [[http://rasterweb.net/raster/2015/10/07/the-detonator/|The Detonator]]
 +  * [[http://rasterweb.net/raster/2015/12/23/screen-printing-demo/|Screen Printing Demo]]
 +  * [[http://rasterweb.net/raster/2016/02/28/the-screwdriver/|The Screwdriver]]
 +  * [[http://rasterweb.net/raster/2013/12/31/dont-be-a-dick/|Don’t be a Dick!]]
  
 ~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/silhouettecameo~size=S~~ ~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/silhouettecameo~size=S~~
  
equipment/silhouettecameo.txt · Last modified: 2024/04/22 22:11 by wildapricot-van_groll_casey

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki