• Rikon 14“ Bandsaw w/Open Stand
• Model# 10-321
• Motor: 1HP, 9 amps, 1700rpm

• Motor: 1HP, 9 amps, 1700rpm
• Blade Length: 99-3/4”
• Blade Width 1/4“ to 3/4”
• Cutting speeds: 1620/3340 Ft/Min
• Made in China
• Manual: rikon_10-321_bandsaw_manual.pdf
• Main tire bearings 6203ZZ. 2 bearings per tire X 2 tires = 4 total bearings. Allen key and snap ring hold tire and bearings in place.
• Guide bearings: 608ZZ. 6 Needed (I think)

• Operational

• Woodshop

• Bill Murray

• Somewhere around 2014 after prior bandsaw was removed
• 2016 Guide bearings and main bearings replaced.

• DO NOT CUT METAL
• Raise or lower blade guide to above material before cutting
• Plastic is allowed
• Bandsaw is locked up, once you are signed off then you get the code.
• Bandsaw is on a wheeled stand, make sure to stop stand from wheeling before using.
• Its a good idea to square the table to the blade before use

No QR code generated yet(feel free to generate one!)