This is an old revision of the document!
Laser Cutter (50 watt)
Make/Model
Specs
Originally 25 watts
Upgraded to 50 watts
Work Area: 24“ x 12”
Current Status
Location
On loan from
Manual
Material Settings
History
11/08/2011 - Arrived at Makerspace
12/31/2012 - Moved to Lenox
02/17/2013 - Some problems with random lines appearing, cuts horizontally
07/20/2013 - Laser tube burnt out
09/15/2014 - Laser tube burnt out
10/30/2014 - Upgraded to 50 watt
Notes
Tips and Advice
-
We'll eventually collect all the forms people have filled out when using the machine and document them here
Be sure to focus the beam using the 2“ tall wood block stored just inside the lid of the machine
The black knob to the right inside the lid raises and lowers the table
Try not to bump the machine while it is running, the magnetic safeties are sensitive and will kill the laser if it thinks the lid is open
QR Code
Don't have barcode reader? Click here.