Differences

This shows you the differences between two versions of the page.

--- projects:ummd [2017/10/02 16:56]
the_digital_dentist [Decisions to be Made]
+++ projects:ummd [2017/10/02 17:07]
the_digital_dentist [Updates]
@@ Line 3: / Line 3: @@
 ===== Introduction =====
-A CoreXY 3D printer being developed by Mark Rehorst at MMS.  Already mostly finished, it has a 300 x 300 x 698 mm print envelope, is fully enclosed and will soon be heated for printing ABS reliably.  It uses a SmoothieBoard 32 bit controller, 400 step per rev motors in the XY stage, and has a belt lifted Z axis using an OnDrives Rino 30:1 worm gear drive unit.
+A CoreXY 3D printer being developed by Mark Rehorst at MMS.  Already mostly finished, it has a 300 x 300 x 698 mm print envelope, is fully enclosed and will soon be heated for printing ABS reliably.
 ==== Completed/Has ====
     * NEMA-17 400 step/rev motors for X and Y axes, 9mm wide glass core belts
@@ Line 27: / Line 27: @@
 ===== Updates =====
-=== 2012/07/10 10:42 ===
+/2/17
-The Digital Dentist has taken quite a lead with this project and scrounged up parts to build a basic frame and put part of an old CNC machine on it.  --- //[[members:peteprodoehl|Pete Prodoehl]]//
-{{:projects:img_8265_crop.jpg?400|}}
+UMMD is fully functional (except the enclosure heater) and was displayed and operational at the Milwaukee Maker Faire last week.
-=== 2012/07/06 08:49 ===
+Here's UMMD along side Son of MegaMax
-I can donate a QU-BD 1.75mm extruder to this project. It will need a Nema 17 motor though. --- // [[members:peteprodoehl|Pete Prodoehl]] //
+{{:projects:da_boyz.jpg?direct&400|}}
+Here's some of that sweet UV illumination
+{{:projects:500mm_vase.jpg?direct&400|}}
+Video here:
+[[https://vimeo.com/235837261|UMMD prints a small vase using fluorescent green TPU]]
+[[https://vimeo.com/236103585|UMMD prints a 500 mm tall lamp shade]]
 ===== Get Involved =====

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools