Differences

This shows you the differences between two versions of the page.

--- projects:slidescanner [2012/08/21 15:15]
raster
+++ projects:slidescanner [2012/09/04 20:15] (current)
raster [Slide Scanner]
@@ Line 3: / Line 3: @@
 {{ :projects:slidescan01.jpg?nolink&300|}}
-I'd been working on a device to photograph slides to convert them to digital form, and was about 75% done with it. I still had to finish the part that would hold the slides and light them from the rear. I had prototypes, but wanted to laser-cut the final working version, which was basically a box with a light source inside of it. Getting diffused light was difficult, and ground glass is expensive. I did try to make my own ground glass substitute with finely sanded acrylic, and it sort of works, but not well enough.
+I'd been working on a device to photograph slides to convert them to digital form, and was about 75% done with it. I still had to finish the part that would hold the slides and light them from the rear.
-I've abandoned it all, because I saw this: http://metrixcreatespace.com/post/20108216677/diy-slide-scanner-lets-say-you-have-a-large
+I had prototypes, but wanted to laser-cut the final working version, which was basically a box with a light source inside of it. Getting diffused light was difficult, and ground glass is expensive. I did try to make my own ground glass substitute with finely sanded acrylic, and it sort of works, but not well enough...
-So that's the direction I'm headed in now, and I've got most of it assembled. There's still all the control bits to do yet, but you can see the updates below.
+I've abandoned that idea, because I saw this: http://metrixcreatespace.com/post/20108216677/diy-slide-scanner-lets-say-you-have-a-large
@@ Line 17: / Line 16: @@
 **Below I'll post updates to this project as they happen.**
+===== Update: 2012-09-03 =====
+I did some test shots, and they worked out well, except for the fact that I had the slides in backwards! (Easy to fix in Photoshop though.) The converted photos do not turn out amazing, but that's fine. If going with the option of the slides never being converted, or being converted less than perfect, I'll choose the latter. I plan on doing an entire test reel with a variety of slides, and I'll post some results. For now, here's a sample image that was probably taken around 1965.
+{{:projects:sampleslide.jpg?nolink&600|}}
 ===== Update: 2012-08-18 =====

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools