Differences

This shows you the differences between two versions of the page.

--- meetingagenda:2022-05-17 [2022/05/17 17:03]
wildapricot-reid_william [Helpful hint]
+++ meetingagenda:2022-05-17 [2022/05/17 17:27]
wildapricot-reid_william [Rule and Regulation of the Week]
@@ Line 13: / Line 13: @@
 ===== Board of Directors and Area Champion Introductions =====
 *
 ===== Guest & New Member Introductions =====
- guests, 4 second-timers
+ guests,  second-timers
 ===== Elections =====
+*
-  *
 ===== Topics =====
@@ Line 40: / Line 40: @@
 ===== Safety Note =====
-  * Avoid flowing hair, loose jewelry and loose clothes around machines that spin.
+  * In the woodshop, always check to ensure you have enough in-feed and out-feed space before
+    * jointing,
+    * cutting using the table saw or band saw
+    * and planing wood
 ===== Helpful hint  =====
-  * Like most things, drill chucks wear out with use.
+  * Like most things, drill chucks wear out with use. Specifically the SHANK (what holds the bit in place) can get worn down. The chuck will no longer hold smaller bits and will continue to "hollow out".
 {{:meetingagenda:drillchuck.jpeg?200 |}}
+If we know they need repair, a repair kit can be installed.
+Here is an example of a chuck needing repair
+{{:meetingagenda:needsrepair.jpg?200 |}}
+Here is one that was recently repaired
+{{:meetingagenda:repairedchuck.jpg?200 |}}
+If you are young and flexible, check the chuck by looking at it.
+If you are older and inflexible, check it using a mirror.
+Post on the board the specific drill/chuck that requires repair.
+To slow down the wear and tear of the shanks in the drill chuck:
+    -Always clean off the drill bit before you place it in the chuck, remove any dirt, grease, etc.
+    -If there are burrs on the drill bit, please file these off.
 ===== Rule and Regulation of the Week =====
-  * You may not use power tools unless you are checked out on them.
+  * we are a do-acracy
-       *This includes anything with a plug or that stands on the floor (e.g. metal shear).
+  * work is done by those building our maker community.
+  * Trying to find a good place to help/start to volunteer?
+      * Mow the grass at Lenox.
+        * Mower and battery are by the back door.
+      * Empty 2 or 3 garbage cans when you visit.
+      * ASK an area champion or board member for a project (there are plenty to go around)
 ===== Member Topics and Announcements =====
   * Woodshop training on Thursday, May 19th from 6 to 8 at LENOX.

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools