Stratasys FDM 2000 3D printer with ABS head

1.75mm filament

ABS or ABS+ plastic resin material (use _only_ Stratasys OEM filament)

Currently located in the 3D Printing Area

Official Milwaukee MakerSpace Checkout Training Document

See Have Blue for Insight 8.1 (Stratasys control software, last version to support the FDM series)

Fully functional except for the support extruder - support hotend appears to be plugged or clogged and probably needs a new one built.

Still need a spare WinXP computer for running the printer.

Chip built a bottom shelf for the cart for storage of filament, parts, etc.

Have Blue

7JUL2013 - Arrived at Makerspace

10SEP2013 - Moved into 3D printing area and began testing

1OCT2013 - Replaced support nozzle solenoid

10OCT2013 - Attempted to clear support nozzle clog; cracked inlet buffer; said a lot of naughty words.

17OCT2013 - replaced inlet buffer, did full cleaning of support hotend, but support side seems clogged worse than before. Said heck with it and decided to just run with the model extruder only for Makerfest.

22OCT2013 - Chip added a shelf to the cart for storage of filament.

You need to be checked out on the Stratasys before you use it! There are melty bits and motors that can crush things. And it's hot.