This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
equipment:makerbotcupcake [2011/11/05 14:45] branth |
equipment:makerbotcupcake [2012/03/08 03:24] raster |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== MakerBot | + | ====== MakerBot |
~~NOTOC~~ | ~~NOTOC~~ | ||
{{ : | {{ : | ||
- | The MakerBot Cupcake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/folders should be stored on the SD card in the MakerBot, which you can copy to your own machine.) | + | ===== Make/Model ===== |
+ | MakerBot | ||
- | The Cupcake has the DC motor extruder, not the stepper motor extruder.\\ | + | ===== Specs ===== |
+ | Working area 100 x 100 mm\\ | ||
+ | Heated Build Platform\\ | ||
+ | DC Motor Extruder\\ | ||
+ | 3mm Filament | ||
- | We print with 3mm ABS filament. Don't attempt to print with PLA unless you ask Drew Dominguez first. Don't try to print with 1.75mm filament, as that won't work. \\ | + | See Also: http://wiki.makerbot.com/cupcake |
- | Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.) | + | ===== Current Status ===== |
+ | OK\\ | ||
+ | |||
+ | ===== Location ===== | ||
+ | Lab | ||
+ | |||
+ | ===== On lend from ===== | ||
+ | [[members: | ||
+ | |||
+ | ===== History ===== | ||
+ | 8/1/2011 - Arrived at Makerspace | ||
+ | |||
+ | ===== Notes ===== | ||
+ | The MakerBot CupCake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/ | ||
+ | |||
+ | We print with 3mm ABS filament. Don't attempt to print with PLA unless you ask [[members: | ||
+ | |||
+ | Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.)\\ | ||
Temperature for the extruder: 210 deg F \\ | Temperature for the extruder: 210 deg F \\ | ||
Temperature for the HBP: 110 (YMMV)\\ | Temperature for the HBP: 110 (YMMV)\\ | ||
- | Resident Experts: Drew Dominguez | + | Need to bond two pieces of ABS together? https:// |
- | Up-And-Coming Expert: Matt Neesley | + | |
+ | ===== Resident Experts | ||
+ | [[members:DrewDominguez|Drew Dominguez]]\\ | ||
+ | Adam C.\\ | ||
+ | [[members: | ||
+ | |||
+ | ===== Up-And-Coming Expert | ||
+ | [[members:MattNeesley|Matt Neesley]] | ||
+ | |||
+ | ===== QR Code ===== | ||
+ | |||
+ | ~~BARCODE~class=barcode_right~url=http:// |