User Tools

Site Tools


boardmeetingagenda:2014-11-20

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardmeetingagenda:2014-11-20 [2014/11/21 02:59]
branth
boardmeetingagenda:2014-11-20 [2014/11/23 05:48] (current)
branth [Minutes]
Line 1: Line 1:
-====== Board Meeting Agenda for November 20, 2014 ======+====== Board Meeting for November 20, 2014 ====== 
 + 
 +===== Minutes ===== 
 + 
 +Meeting Time: 6:30pm\\ 
 +Location: Lenox, Meeting Room  
 + 
 +  * All members are welcome to attend, and non-board members can join the conversation when invited. 
 +  * Tom gave his proxy to Brant by email to the BOD since he couldn't attend 
 + 
 +==== Legal/Financial ==== 
 +=== 6:40 Treasurer's Report (October) === 
 +  * Brant and Joe working to revise, then will send out to members 
 +=== 6:41 Building ownership/purchasing shares report progress === 
 +  * (added by Brant, suggested by JoeR last meeting) 
 +  * Lance suggested we table this discussion until we have a plan or something to work from 
 +  * Dan and Joe discussed how to start this exercise, which options to look at 
 +  * Joe mentioned pros and cons of considering mortgages 
 +  * Joe also wants to know value of building, CMA report, not an appraisal or assessment 
 +  * **Vote to ask TomG to speak with realtor about getting a CMA report approved with 7 yeas** 
 +=== 6:47 Non-profit, 501c3 status === 
 +  * (added by Brant, update from TomG) 
 +  * No update at this time 
 +  * Later in the meeting DL said that Kettle Moraine Hardwoods is ready when our status is cleared, we can  send them a form to get discounts 
 +=== 6:48 Mint.com progress ===  
 +  * (added by Brant, update from DanJ) 
 +  * Dan explained how to read reports 
 +  * Dan suggested we use Mint to issue Treasurer's Reports in the future 
 +  * Not sure if it will  
 +=== 6:52 Quicken, accounting software progress ===  
 +  * (added by Brant, update from ?) 
 +  * Bounty not yet announced formally, we should email it out ASAP 
 +  * We don't pay the prize until someone produces the code and results 
 +  * Vishal noted this died before we determined what the requirements would be, need to draft guidelines 
 +==== Policies and Procedures ==== 
 + 
 +==== Check on progress of Building Topics/Projects ==== 
 +=== 6:55 How are we doing on moving people out of east room, implementing rate increases? ===   
 +  * (added by Brant from last meeting) 
 +  * Tiffany not sure current status of MattN's storage, if anything remains in East Room 
 +  * Lance was not sure whose clamps they are, or if MattN was going to sell them on eBay  
 +  * Tiffany said rate increases not needed if everyone moves out 
 +  * Lance doesn't think the Storage Changes were well communicated, we should announce it better 
 +  * Tiffany was concerned that people renting small amounts of space; we arbitrarily bumped TomK, ShaneT, AllanF, others  
 +  * Tiffany doesn't think renting floor space should preclude someone from keeping a normal shelf 
 +  * Carts are not considered rented storage per Lance and Tiffany 
 +  * Tiffany said anything above the cart height is not a cart 
 +  * Not clear if you lose free storage by renting a vault 
 +  * Not having enough room for long-term floor storage space is Tiffany's concern 
 +  * Tiffany suggested grandfathering in the 5 or 6 people who we don't have room for 
 +  * Lance had concerns about not being fair to new members and the perception that we would be treating some people as special cases 
 +  * Lance asked about using Vault Hallway between Vaults 18 & 19, no real discussion on this occurred  
 +  * Rate increases would not affect these people as it's not fair because we promised them space in the vault hallway 
 +  * DL suggested calling it "temporary overflow" instead of "grandfathering in" 
 +  * Lance agreed that changing the terminology made it more palatable  
 +  * **Vote to allow members that were displaced by reorganizing the floor rental spaces to occupy a space in the East Room we designate as "Temporary Vault Hallway Overflow Storage" was approved with 7 yeas** 
 +=== 7:22 Renting additional storage ===  
 +  * Tiffany asked whether or not if people lose their free shelf if they rent some other space temporarily 
 +  * Tiffany asked how much do you pay if you rent floor space and a shelf 
 +  * Tiffany said several members are using half pallets and it messes with the storage inventory 
 +  * Vishal asked why he would need to start paying for something he normally gets for free, Tiffany 
 +  * Joe brought up some concerns about bookkeeping and telling people different things 
 +  * Lance said his expectation is that $40 in dues includes a shelf 
 +  * DL noted we should charge a vault renter for a shelf because they get the vault 
 +  * **Vote proposed:** 
 +      * **If you rent short term storage, you continue to keep your free storage space (shelf, locker, cart)** 
 +      * **If you rent long term storage (anything more than 3 months i.e. Green spaces on storage map) you pay for additional storage, you do not keep free storage** 
 +      * **Approved with 7 yeas** 
 +=== 7:38 Snow Removal ===  
 +  * (added by Brant, update from Adrian) 
 +  * No update at this time 
 +  * Lance asked if we were to get a foot of snow tomorrow, who would shovel it?   
 +      * We would likely ask for volunteers, no contracts yet 
 +      * DL asked if we could find someone in the neighborhood to pay to plow our sidewalks and alley  
 +      * Joe noted we could offer the job up to members 
 +      * We will follow up with Adrian and get an update 
 +=== 7:40 Lockers === 
 +  * (added by Tiffany) 
 +      * Will move them soon, trying to get others to help 
 +      * Brant noted a big sheet of steel remains where the lockers will go, Joe offered to take it 
 +      * Brant asked Tiffany for a plan of which lockers would fit where, Lance agreed 
 +=== 7:40 Storage Inventory Update ===  
 +  * (added by Tiffany) 
 +  * Tiffany presented new labels and tags for shelves, lockers, carts, etc. 
 +  * Tiffany asked that we remind members to label their storage with their real name 
 +  * Brant asked if Reminderbot could be made to send out a reminder, Joe said he ignores Reminderbot usually and thinks most others do too 
 +=== 7:44 Long Storage Proposal ===  
 +  * (added by Tiffany) 
 +  * Tiffany handed sketches of shelving to Lance 
 +  * Budget of $200 discussed to build new shelving 
 +  * Shelving would need to be built to organize all long stock storage 
 +  * Location  
 +      * Tiffany proposed it be located in middle of east room 
 +      * Lance suggested it be closer to the west room so long items can be loaded and unloaded 
 +      * Overflow storage area and forklift, coordinate with where those best fit 
 +      * Lance suggested two things 
 +          * Add a gap at base to move unit with forklift 
 +          * Make taller than 8 feet if you want to hold 8 foot tall sheets 
 +      * Solid walls discussed, but don't need to be solid all the way up 
 +      * The group discussed moving stock over  
 +      * Lance offered to draw up a revised sketch for this 
 +      * Tiffany asked for help building this, but could head it up 
 +      * DanJ asked when will this get done, Tiffany indicated  
 +==== Check on progress of Member/Space Projects ==== 
 +=== 7:56 4x8 CNC Plasma Cutter ===  
 +  * (added by Brant, ask JoeR) 
 +  * Lance asked if JoeR has any progress on it, Joe did not have an answer 
 +  * Lance asked when should it be completed, not clear at this time 
 +  * Joe said he's worked on it 2 days in 6 months, some people have helped  
 +=== 8:02 Keys were discussed ===  
 +  * Dan asked if he could help Joe with any payments or bills 
 +      * Joe did not have anything at this time,did not know what to delegate 
 +      * Brant offered to help as well 
 +      * Brant noted that he still has a key to the Drop Box if Joe wants him to help process dues 
 +      * Lance noted that he does not yet have a Drop Box key and asked Brant for the key he still had  
 +  * Tiffany noted that she spoke with MattJ about his key to the building 
 +      * She said he would be willing to give his key back, but he has retained the codes/measurements as its common practice in case we need future keys 
 +      * Brant said he was concerned about a non-board member having a key to the building and the IT Closet 
 +      * This conversation has come up before with the Board 
 +  * Tiffany also said that some members have practiced lock picking on the Drop Box 
 +      * Brant asked Tiffany to clarify donation boxes or the Drop Box where members place dues, Tiffany said it was the dues Drop Box  
 +      * Vishal said he was aware of that but it happened about two years ago and has not happened since 
 +  * DL said that MattJ helped the last time that some lockers were moved 
 +      * She was concerned that there might have been fragile or dangerous items inside 
 +      * When asked to help open them, MattJ didn't feel it was appropriate  
 +      * She trusted MattJ would not abuse having a key 
 +  * Lance was concerned about liability of having a non-licensed or bonded 
 +  * Lance suggested we put a camera on the Drop Box just as a thought 
 +  * Tiffany said she could explain our concerns to MattJ because she is friends with him 
 +  * Brant asked if we should contact him as a group, some didn't think that would be as well-received  
 +  * Tiffany also said she may have accidentally misrepresented MattJ's tone or intent 
 +  * No action or votes were taken 
 +=== 8:18 4x8 CNC Router ===  
 +  * (added by Brant, ask SteveP) 
 +  * Steve is working on it, no further update at this time 
 +=== 8:18 Kuka ===  
 +  * (added by Brant, ask MattN) 
 +  * Motor drive needed, planning to buy one this week 
 +  * Lance asked when Kuka will be ready, MattN said January 1, 2015  
 +  * Vishal asked if anything other than drive was needed, MattN said he plans to upgrade to a different spindle eventually 
 +===  8:20 "Misty Field" project update ===   
 +  * (added by Brant, update from DavidH) 
 +  * Temporary spot located in East room according to Tiffany 
 +=== 8:21 "Red Dragon" RA-1F Vertical Mill update ===  
 +  * (added by Brant, Tom gave update) 
 +  * Tom emailed his update prior to the meeting 
 +  * Ready to start running tests, details in the e-mail sent to the group 
 +  * EdC was working on software to generate Gcode, MattN asked about how Gcode would be generated 
 +      * MattN suggested we add another CAD workstation 
 +      * Tiffany asked when computer in Jewelry Area will move, MattN offered to move it tomorrow night 
 +=== 8:23 Cold Saw ===  
 +  * (added by Brant, Tom gave update) 
 +  * Almost cut Tuesday, Tom expects it to be functional by the end of the month 
 +  * At that point we can see if the Metal Shop champions want it 
 +=== 8:24 Induction Furnace ===  
 +  * (added by Brant, Tom gave update) 
 +  * Tom said this is on hold until the previous two are finished 
 +  * Tom expects to start working on it in December 
 +=== 8:24 Large format plotters ===  
 +  * (added by Brant, Tom gave update) 
 +  * Tom asked that we add these to list of incomplete projects that need regular updates 
 +  * SteveP gave an update, building a CNC router instead 
 +  * Patrick is a new plotter Area Champion, lives near DanJ 
 +==== New equipment/donations ==== 
 +===  8:25 Watch/Clock Parts === 
 +  * (added by Brant, ask CharlesS/MattJ) 
 +  * Brant asked is there a plan to integrate parts into jewelry area? If so, when?   
 +  * MattN offered to move the computer tomorrow night 
 +  * Dan noted Charles posted an email to the members only list 
 +  * Tiffany wants the shelving and cabinets to be moved into the jewelry area 
 +=== 8:27 Machine shop desk/tooling space request progress ===  
 +  * (added by Brant from last meeting) 
 +  * Tiffany said this will go in the Vault hallway once lockers are moved 
 +=== 8:29 Welding Gas + Safety Glasses donation possibility ===   
 +  * (added by Dan) 
 +  * Marc and Dan and Lance discussed on Tuesday 
 +  * Logo and link on website requested if Marc's company donates multiple items over long period of time 
 +  * Dan indicated Marc is not the decision maker on this for his firm, but he will advocate for as much as stuff as possible 
 +      * Vishal asked what our standard has been 
 +      * Dan said we used to ask $100/year for a logo on the site, Vishal said we should probably increase this, he suggested $1000/year as a minimum and we revisit and review each year 
 +      * Lance said a blog post would be our first step, then take it from there 
 +      * Banners in the space still debatable for some Board Members 
 +      * We agreed to continue discussing this topic via the BOD mailing list 
 +      * Lance asked Dan if there was a deadline to respond to Marc, Dan said next 48 hours would  
 +      * Tiffany asked about face safety masks as well, Dan said they should have some too 
 +      * As an aside, Lance offered his face shield if anyone needs it 
 +==== Events ==== 
 +==== Any topics from members who are present ==== 
 +=== 8:37 Tiffany asked about the Shapeoko 2 on top of the lockers ===  
 +  * Vishal said he was working with Ron Bean who offered to help 
 +===  8:38 DL asked about the following ===  
 +  * Rock saw ready to set up whenever space is available 
 +  * Uncertain about attendance Make-A-Thon, could be huge since Maker Faire 
 +  * DL asked about designating some storage for Space events and supplies 
 +  * Lance suggested, even though he is next on the list for a vault, he would be interested in a vault be designated for event and outreach supplies 
 +  * **Vote to designate shelving in the Women's Coat Room for event supplies approved with 6 yeas, 1 nay from Joe** 
 +      * Joe thinks supplies should be shared, used as needed 
 +      * Lance noted that some members have volunteered to store event things in their own space and that's not fair to them 
 +=== 8:45 Area Champions Committee ===  
 +  * Tiffany presented an list of responsibilities and duties 
 +  * Plans to involve Area Champions and Members 
 +      * Dan noted many Members offer ideas, but Area Champions are usually the ones that get them done 
 +      * Lance suggested meeting with Area Champions first to show them we appreciate their efforts 
 +  * Vishal asked how Area Champions should be chosen, Tiffany said she wants people to know what is expected of them  
 +  * Lance asked that we try to contact Area Champions who are members in good standing but we haven't seen lately to check if they still want to be Area Champions 
 +  * Dan, Joe, and Tiffany discussed having two or more Champions, reasons for more or only 2 
 +  * Tiffany said she has been monitoring and keeping track of which spaces are lacking Area Champions 
 +  * Vishal offered to become Wood Shop Area Champion again 
 +  * Joe asked about the line "all champions" versus "all champions in that area," Tiffany acknowledged that part could be clarified  
 +=== 8:54 Acrylic Bender ===  
 +  * Vishal spoke with Lexie about a place to store it 
 +  * Lance suggested we move the acrylic bender into the laser Cutter room 
 +  * **Vote to bring in the acrylic bender once it arrives approved with 6 yeas and Vishal abstaining** 
 +=== Meeting ended at 8:57 ===  
 + 
 +===== Original Agenda =====
  
 Meeting Time: 6:30pm\\ Meeting Time: 6:30pm\\
 Location: Lenox, Meeting Room  Location: Lenox, Meeting Room 
  
-  * 5 minute time limit per highest-level bullet point. 
   * All members are welcome to attend, and non-board members can join the conversation when invited.   * All members are welcome to attend, and non-board members can join the conversation when invited.
   * Tom gave his proxy to Brant by email since he couldn't attend   * Tom gave his proxy to Brant by email since he couldn't attend
  
   - Legal/Financial:   - Legal/Financial:
-      - 6:40 Treasurer's Report (October) +      - Treasurer's Report (October) 
-          - Brant and Joe working to revise, then will send out to members +      - Building ownership/purchasing shares report progress (added by Brant, suggested by JoeR last meeting) 
-      - 6:41 Building ownership/purchasing shares report progress (added by Brant, suggested by JoeR last meeting) +      - Non-profit, 501c3 status (added by Brant, update from TomG) 
-          - Lance suggested we table this discussion until we have a plan or something to work from +      - Mint.com progress (added by Brant, update from DanJ) 
-          - Dan and Joe discussed how to start this exercise, which options to look at +      - Quicken, accounting software progress (added by Brant, update from ?)
-          - Joe mentioned pros and cons of considering mortgages +
-          - Joe also wants to know value of building, CMA report, not an appraisal or assessment +
-          - VOTE TO ASK TOM TO GET REALTOR TO CREATE CMA REPORT, 7 yeas  +
-      - 6:47 Non-profit, 501c3 status (added by Brant, update from TomG) +
-          - No update at this time +
-          - DL said Kettle Moraine Hardwoods is ready for us to send them a form to get discounts +
-      - 6:48 Mint.com progress (added by Brant, update from DanJ) +
-          - Dan explained how to read reports +
-          - Dan suggested we use Mint to issue Treasurer's Reports in the future +
-          - Not sure if it will  +
-      - 6:52 Quicken, accounting software progress (added by Brant, update from ?) +
-          - Bounty not yet announced formally, we should email it out +
-          - We don't pay the prize until someone produces the code and results +
-          - Vishal noted this died before we +
   - Policies and Procedures:   - Policies and Procedures:
       - ...       - ...
   - Check on progress of Building Topics/Projects:   - Check on progress of Building Topics/Projects:
-      - 6:55 How are we doing on moving people out of east room, implementing rate increases? (added by Brant from last meeting) +      - How are we doing on moving people out of east room, implementing rate increases? (added by Brant from last meeting) 
-          - Tiffany not sure  +      - Snow Removal (added by Brant, update from Adrian)
-          - Lance was not sure whose clamps they are, or if MattN was going to sell them on eBay  +
-          - Tiffany said rate increases not needed if everyone moves out +
-          - Lance doesn't think the Storage Changes were well communicated  +
-          - We should announce it more freely +
-          - Tiffany was concerned that people renting small amounts of space, we arbitrarily bumped TomK, ShaneT, AllanF, others  +
-          - Tiffany doesn't think renting floor space should preclude you from keeping a normal shelf, past +
-          - Lance suggested anything in East or West Room  +
-          - Carts are not considered rented storage per Lance and Tiffany +
-              -   Tiffany said anything above the cart height is not a cart +
-          - Not clear if you lose free storage by renting a vault +
-          - Long term floor storage space is Tiffany's concern +
-          - Tiffany suggested grandfathering in the 5 or 6 people who we don't have room for +
-          - Lance had concerns about not being fair to new members, the perception of special cases +
-          - Lance asked about using Vault Hallway between Vaults 18 & 19 +
-          - Rate increases would not affect these people as it's not fair because we promised them space in the vault hallway +
-          - DL suggested calling it temporary overflow +
-          - Lance agreed with the terminology, playing Devils Advocate +
-          - VOTE TEMPORARY OVERFLOW FROM VAULT HALLWAY, 7 yeas  +
-      - 7:22 Tiffany asked us whether or not if people lose their free shelf if they rent some other space temporarily +
-          - How much do you pay if you rent  +
-          - How many members are using half pallets?  Tiffany said many and it messes with the storage inventory +
-          - Vishal asked why he would need to start paying for something he normally gets for free, Tiffany +
-          - Joe brought up  +
-          - Lance used the example of his expectation his $40 includes a shelf +
-          - DL noted we should charge a vault renter for a shelf because they get the vault +
-          - Tiffany suggested a vote +
-              - If you rent short term storage, you continue to keep your free storage space (shelf, locker, cart)   +
-              - If you rent long term storage (anything more than 3 months i.e. Green spaces on storage map) you pay for additional storage, you do not keep free storage +
-          - VOTE TO DO ABOVE 7 yeas +
-      - 7:38 Snow Removal (added by Brant, update from Adrian)+
       - Lockers (added by Tiffany)       - Lockers (added by Tiffany)
-          Joe will claim tonight +      - Storage Inventory Update (added by Tiffany)
-          -  +
-      - 7:40 Storage Inventory Update (added by Tiffany) +
-          - Tiffany presented new labels and tags for shelves, lockers, carts, etc. +
-          -  Reminderbot +
       - Long Storage Proposal (added by Tiffany)       - Long Storage Proposal (added by Tiffany)
-          - Tiffany handed sketches of shelving to Lance 
-          - Budget of $200 discussed 
-          - Shelving would need to be built to organize all long stock storage 
-          - Location  
-              - Tiffany proposed it be located in middle of east room 
-              - Lance suggested it be closer to the west room so long items can be loaded and unloaded 
-              - Overflow storage area and forklift, coordinate with where those best fit 
-          - Lance suggested two things 
-              - Add a gap at base to move unit with forklift 
-              - Make taller than 8 feet if you want to hold 8 foot tall sheets 
-          - Solid walls discussed, but don't need to be solid all the way up 
-          - The group discussed moving stock over  
-          - Lance offered to draw up a revised sketch for this 
-          - Tiffany asked for help building this, but could head it up 
-          - DanJ asked when will this get done, Tiffany indicated  
       - ...       - ...
   - Check on progress of Member/Space Projects:   - Check on progress of Member/Space Projects:
-      - 7:56 4x8 CNC Plasma Cutter (added by Brant, ask JoeR) +      - 4x8 CNC Plasma Cutter (added by Brant, ask JoeR) 
-          - Lance asked if JoeR has any progress on it, Joe did not have an answer +      - 4x8 CNC Router (added by Brant, ask SteveP) 
-          - Lance asked when should it be completed  +      - Kuka (added by Brant, ask MattN) 
-          - Joe said he's worked on it 2 days in 6 months, some people have helped  +      - "Misty Field" project update (added by Brant, update from DavidH) 
-      - 8:02 Keys were discussed  +      - "Red Dragon" RA-1F Vertical Mill update (added by Brant, Tom gave update)
-          - Dan asked if he could help Joe with any payments or bills +
-              - Joe did not have anything at this time,did not know what to delegate +
-              - Brant offered to help as well +
-              - Brant noted that he still has a key to the Drop Box if Joe wants him to help process dues +
-              - Lance  +
-          - Tiffany noted that MattJ said he would be willing to give his key back +
-          - Tiffany said that some members  +
-          - Lance was concerned about liability of having a non-licensed  +
-          - Lance suggested we put a camera on the Drop Box just as a thought +
-          - No vote was taken  +
-      - 8:18 4x8 CNC Router (added by Brant, ask SteveP) +
-          - Steve is working on it, no  +
-      - 8:18 Kuka (added by Brant, ask MattN) +
-          - Motor drive needed, planning to buy this week +
-          - Lance asked when Kuka will be ready, MattN said January 1, 2015  +
-          - Vishal asked if anything other than drive was needed, MattN said he plans to upgrade to a different  +
-      - 8:20 "Misty Field" project update (added by Brant, update from DavidH) +
-          - Temporary spot carved out in East room according to Tiffany +
-      - 8:21 "Red Dragon" RA-1F Vertical Mill update (added by Brant, Tom gave update)+
           - Tom emailed, ready to start running tests, details in the e-mail sent to the group           - Tom emailed, ready to start running tests, details in the e-mail sent to the group
-          EdC was working on software to generate Gcode, MattN asked about how Gcode would be  +      - Cold Saw (added by Brant, Tom gave update)
-          - MattN suggested we add another CAD workstation +
-          - Tiffany asked when computer in Jewelry Area will move, MattN offered to move it tomorrow night +
-      - 8:23 Cold Saw (added by Brant, Tom gave update)+
           - Almost cut Tuesday, Tom expects it to be functional by the end of the month           - Almost cut Tuesday, Tom expects it to be functional by the end of the month
           - At that point we can see if the Metal Shop champions want it           - At that point we can see if the Metal Shop champions want it
-      - 8:24 Induction Furnace (added by Brant, Tom gave update)+      - Induction Furnace (added by Brant, Tom gave update)
           - on hold until the previous two are off my plate           - on hold until the previous two are off my plate
           - Tom expects to start working on it in December           - Tom expects to start working on it in December
-      - 8:24 Large format plotters (added by Brant, Tom gave update)+      - Large format plotters (added by Brant, Tom gave update)
           - Tom asked that we add these to list of incomplete projects that need regular updates           - Tom asked that we add these to list of incomplete projects that need regular updates
-          - SteveP gave an update, building a CNC router instead 
-          - Patrick is a new plotter Area Champion, lives near DanJ 
       - ...       - ...
   - New equipment/donations:   - New equipment/donations:
-      - 8:25 Watch/Clock Parts, is there a plan to integrate parts into jewelry area? If so, when? (added by Brant, ask CharlesS/MattJ) +      - Watch/Clock Parts, is there a plan to integrate parts into jewelry area? If so, when? (added by Brant, ask CharlesS/MattJ) 
-          - MattN will move the computer tomorrow night +      - Machine shop desk/tooling space request progress (added by Brant from last meeting) 
-          - Charles posted an email to the members only list +      - Welding Gas + Safety Glasses donation possibility. (added by Dan)
-          - Tiffany wants the shelving and cabinets to be moved in +
-      - 8:27 Machine shop desk/tooling space request progress (added by Brant from last meeting) +
-          - This will go in the Vault hallway once lockers are moved +
-      - 8:29 Welding Gas + Safety Glasses donation possibility. (added by Dan) +
-          - Marc and Dan and Lance discussed on Tuesday +
-          - Logo and link on website requested if they donate multiple items over long period of time +
-          - Dan indicated Marc is not the decision maker on this for his firm, but he will advocate for as much as stuff as possible +
-          - Vishal asked what our standard has been, Dan said we used to ask $100/year for a logo on the site, Vishal said we should probably increase this, he suggested $1000/year as a minimum and we revisit and review each year +
-          - Lance said a blog post would be our first step, then take it from there +
-          - Banners in the space still debatable for some Board Members +
-          - We agreed to continue discussing this topic via the BOD mailing list +
-          - Lance asked Dan if there was a deadline to respond to Marc, Dan said next 48 hours would  +
-          - Tiffany asked about face safety masks as well, Dan said they should have some too +
-          - As an aside, Lance offered his face shield if anyone needs it+
       - ...       - ...
   - Events:   - Events:
       - ...       - ...
   - Any topics from members who are present   - Any topics from members who are present
-      - 8:37 Tiffany asked about the Shapeoko 2 on top of the lockers 
-          - Vishal said he was working with Ron Bean who offered to help 
-      - 8:38 DL asked about the following 
-          - Rock saw ready to set up whenever space is available 
-          - Uncertain about attendance Make-A-Thon, could be huge since Maker Faire 
-          - DL asked about designating some storage for Space events and supplies 
-              - Lance suggested, even though he is next on the list for a vault, he would be interested in a vault be designated for outreach supplies 
-          - VOTE 6 yeas, 1 nay from Joe 
-              - Joe thinks supplies should be shared  
-              - Lance noted that some members have volunteered to store event things in their own space and that's not fair to the  
-      - 8:45 Area Champions Committee 
-          - Tiffany presented an list of responsibilities and duties 
-          - Plans to involve Area Champions and Members 
-              - Dan noted many Members offer ideas, but Area Champions 
-              - Lance suggested meeting with Area Champions first to show them we appreciate their efforts 
-              - Vishal asked how Area Champions should be chosen, Tiffany said she wants people to know what is expected of them  
-          - Lance asked that we try to contact members who are in good standing, but we don't see often in the building 
-          - Dan, Joe, and Tiffany discussed having two or more Champions, reasons for more or only 2 
-          - Tiffany said she has been monitoring and keeping track of which spaces are lacking Area Champions 
-          - Vishal offered to become Wood Shop Area Champion again 
-          - Joe asked about the line "all champions" versus all champions in that area, Tiffany noted that comment 
-      - 8:54 Acrylic Bender 
-          - Vishal spoke with Lexie about a place to store it 
-          - Lance suggested we move the acrylic bender into the laser Cutter room 
-          - VOTE TO BRING IN ACRYLIC BENDER WHEN IT ARRIVES, 6 yeas, Vishal abstained 
-      - Meeting ended at 8:57 
       - ...       - ...
 +
boardmeetingagenda/2014-11-20.1416538792.txt.gz · Last modified: 2014/11/21 02:59 by branth