Table of Contents
Milwaukee Makerspace Lighting Controller - Version 2.0
Basic Description
- Replaced user interface only; existing relays and other wiring remain in use
- 16mm green LED pushbuttons indicate on/off status
- Buttons available here: http://www.adafruit.com/products/1443
Back to Parent Page: Milwaukee Makerspace Lighting Controller
Documentation
Laser-Cut Cardboard Mock-Up
Showing original 10 zones; consolidated to 7 total in the final version
Panel Wiring
Pushbutton Teardown
I sort of destroyed one of the pushbuttons while soldering. I left the soldering iron on the terminals too long and I melted it through the enclosure. Since it was kaput, I tore it apart to see the guts.
