User Tools

Site Tools


spaceprojs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
spaceprojs [2019/01/28 17:24]
wildapricot-schneider_markus [Punch List for January 2019]
spaceprojs [2019/07/02 23:17]
kathughett
Line 9: Line 9:
 ===== Current To Do List =====  ===== Current To Do List ===== 
        
-==== Punch List for February 2019 ====+==== Punch List for Sun. July 28, 2019 ====
   - First thing - Vacuum cafe area and meeting room.   - First thing - Vacuum cafe area and meeting room.
   - Second thing - Sanitize cafe tables and meeting room tables. These need to be done before the food or any snacks are set up.    - Second thing - Sanitize cafe tables and meeting room tables. These need to be done before the food or any snacks are set up. 
   - Empty the vacuum cleaners as well as the floor sweeper in the main alley entrance. (It's a dusty maroon color)     - Empty the vacuum cleaners as well as the floor sweeper in the main alley entrance. (It's a dusty maroon color)  
-  - Vacuum Cafe area at the end of the day after the feast.  +  - Clean out the Toaster, Toaster Oven, and Microwave as needed. 
-  - Red ticket abandoned projects in East Room+  - SUPERIMPORTANT: Clean out the ceiling ventilation filter in the Woodshop
-  - Install suspended electrical hookup above craft lab table. (Colleen and Markus+  - More work needed on the compressed air dryer (See Markus or Tom G.) 
-  - Add 8 additional lights to the metal shopThey need to be wired in. See Tom Kfor instructions+  - Revamp the Cafe area floor. (See Kyle
 +  - Scrub the sinks in the mud room. 
 +  - Reorganize the Electrical Engineering cart in the Vault Hallway.(Mike T.
 +  - If the grill is used during SID assign someone to clean it at the end of the day.(See instructions below) 
   - See if there are enough trash bags in the green supply cabinet by the men's room. If not enough, buy more now.   - See if there are enough trash bags in the green supply cabinet by the men's room. If not enough, buy more now.
-  - Disseminate contents of IMPOUND LOT. 
-  - Organize the paint room shelves. Dust off cans.  
   - Inventory storage, find lapsed storage still in use (Ongoing for Facilities Director)    - Inventory storage, find lapsed storage still in use (Ongoing for Facilities Director) 
-  - {{:miscellaneous:lenox-fireextinguishers.pdf|Monthly life-safety inspections check list}} (and update the page [[miscellaneous:maintenance|here]]) +  - {{:miscellaneous:lenox-fire extinguishers.pdf|Monthly life-safety inspections checklist}} (and update the page [[miscellaneous:maintenance|here]])<- The highlighted pdf. is found here as well.  
-  - Check and restock first-aid kits, (and update the page [[miscellaneous:maintenance|here]]) +  - Check and restock first-aid kits, (and update the page [[miscellaneous:maintenance|here]])   
 +  - Disseminate contents of Impound Lot IF needed.(Facilities Director) 
 +  - Vacuum Cafe area at the end of the day after the feast.  
 +  - Red ticket abandoned projects in East Room. 
 +  - Check paper towel stock 
 +  - Check soap dispensers for bacterial growth, clean them with bleach water if necessary, and fill them with soap solution.  
 +  - Sort through tall storage 
 +  - Make sure parking permit/ticket holders are sufficiently stocked. See IT Tony or Kathy H. for more permits/tickets. 
 +  - Clean out vacuum cleaner filters 
 +  - Finish Milwaukee Tools Cabinet 
 +  - Organize and downsize the books in the library and determine what books can be tossed. (Need a long term member and a newer member for this job.)  
 +  - Bring in the large bookcase from next to the Dalek area and replace two smaller bookcases with it after the library has been sorted and downsized.  
 +  - Paint wall in Lobby area. (Project on hold) 
 +  - See if any of the following need replacing ->->->->->
   - Replace wash sink water filters (and update the page [[miscellaneous:maintenance|here]])   - Replace wash sink water filters (and update the page [[miscellaneous:maintenance|here]])
   - Replace furnace filters if needed (and update the page [[miscellaneous:maintenance|here]])   - Replace furnace filters if needed (and update the page [[miscellaneous:maintenance|here]])
   - Replace wood shop air filters (ongoing)   - Replace wood shop air filters (ongoing)
-  - Revamp the Cafe area and build a large rolling island with cabinets below for storage(See Kyle). 
-  - Craft Lab: - Organize scrap materials, throw away silly (e.g. tiny and/or unusable) pieces, Organize and evaluate supplies with Make-a-thon in mind.  
-  - Clean up Cosplay room. Clear path to server room door.  
-  - Paint wall behind dining table in Lobby area. (Colleen & Kathy need to choose a paint color first) 
-  - Install additional lights in vault hallway. (brought in by Matt Melk).(Does anyone still feel that we need to do this?) 
  
 ===== Standing To-Do/Cleanup Day Items ===== ===== Standing To-Do/Cleanup Day Items =====
 ==== General ==== ==== General ====
   - See [[miscellaneous:maintenance|Misc Maintenance]]   - See [[miscellaneous:maintenance|Misc Maintenance]]
 +  - Sharpen and Sort Drill Bits in Metal Shop (Also check with Woodshop Champion)
   - Replace burned out bulbs   - Replace burned out bulbs
   - Wash off meeting room tables   - Wash off meeting room tables
-  - Clean out ashtray next to alley door +  - Clean up cigarette butts in the alley and by the southwest door. (SHB done by smoking members)
-  - Crush Aluminum cans in Recycling bin+
   - Vacuum carpeted areas   - Vacuum carpeted areas
   - Organize Hack Racks   - Organize Hack Racks
Line 46: Line 55:
   - Clean bathrooms   - Clean bathrooms
   - Inventory member storage against a printout of the wiki, then crosscheck that with active member list (Board member needed for this) so we can clear off empty spaces. (Ongoing by Kathy H.)   - Inventory member storage against a printout of the wiki, then crosscheck that with active member list (Board member needed for this) so we can clear off empty spaces. (Ongoing by Kathy H.)
 +
 +==== Cleaning the Grill ====
 +When you've finished using the grill heat it up to burn off the crud. Once the remains are burnt to ash use a grill brush to remove the remaining bits. Turn the grill to medium heat and apply vegetable oil to the grates. Let the grill cool down completely before putting on the fabric cover.  
 +
 +At the end of grilling season view this video for a thorough cleaning of the grill. https://www.google.com/search?ei=Fp6iXNGnM8O4tQWNvL7IAg&q=How+to+clean+a+gas+grill&oq=How+to+clean+a+gas+grill&gs_l=psy-ab.3..0i7i30j0j0i7i30l7j0.1679.1679..2682...0.0..0.288.288.2-1......0....1..gws-wiz.......0i71.eZUhHp96tmM#kpvalbx=1 
 +
 +==== Quick and/or Easy Tasks ====
 +
 +**Electronics lab**
 +  - Re-align the resistor/capacitor boxes
 +  - Make the soldering table look like the photo on the wall above it
 +  - Sort hanging multimeter leads
 +  - Sort tools hanging on the wall
 +
 +**3D Printing**
 +  - Put tools away in the tray above SoM  or on the wire shelf
 +  - Clean off bits of filament from inside / under the printers
 +  - Put the spools back in the proper container
 +  - Wipe off the desks
 +  - Sweep the floor
 +
 +**General**
 +  - Empty vacuum cleaners and clean the filter
 +  - Clean table surfaces
 +  - Sort screws in the screw bins by the metalshop
 +  - Sort drill bits in the metal shop
 +  - Coil up loose cables and hoses
 +  - Use the push sweeper in the east and west room
 +  - Replace paper towel rolls
 +  - Place ryobi batteries in charger
 +  - Collect measuring tapes from around the space and put them back in the bin to the left of the wood shop
 +  - Check parking permits for expiration and write "Ticket" on the ones that are expired
 +  - Add parking tickets to obviously out-of-place items
 +  - Move items/carts/tables out of aisles
 +  - Make sure the emergency phones are plugged in, charging, and operational
  
 ==== Website ==== ==== Website ====
Line 57: Line 101:
   - Parking sign for Building - electronic (still desired?   - Parking sign for Building - electronic (still desired?
   - Finish the exterior south east entrance (vault hall).  The ceiling panels door need to be caulked and painted. (See Tom G.)   - Finish the exterior south east entrance (vault hall).  The ceiling panels door need to be caulked and painted. (See Tom G.)
-  - Paint new brick work outside the building by the welding and paint booth vents.+  - Paint new brick work outside the building by the welding and paint booth vents. Need to find out from Tom G. what and where
   - Repair broken bricks & tuckpointing around the outside of the building.   - Repair broken bricks & tuckpointing around the outside of the building.
  
Line 67: Line 111:
   - Get an ice maker working in one of the refrigerators (kegerator has one)   - Get an ice maker working in one of the refrigerators (kegerator has one)
   - Re-stripe the exit aisles - add some diagonal stripes so people know what part is aisle.   - Re-stripe the exit aisles - add some diagonal stripes so people know what part is aisle.
-  - Access control system at Vault entrance - Dan J. 
   - Paint new brick work inside the vault hall   - Paint new brick work inside the vault hall
   - Replace steel floor plates covering holes, or Flatten and weld reinforcements on them so they won't bend if the forklift drives over them - Dan J.   - Replace steel floor plates covering holes, or Flatten and weld reinforcements on them so they won't bend if the forklift drives over them - Dan J.
Line 79: Line 122:
  
 ===== Completed Projects ===== ===== Completed Projects =====
 +  - <del>- Add Electrical outlet in the cafe area.</del> Mike Tarnowski 
 +  - <del>- Design and build a bigger, better vault key box for the server room. Completed by Markus.</del> 
 +  - <del>- Paint the lettering on the big First Aid cabinet in the mud room RED. (Kathy Hughett)</del> 
 +  - <del>- Clean graffiti off of external East Wall. We were notified by Neighborhood services on 3/27/2019.</del> Graffiti was removed by Neighborhood Services 
 +  - <del>- Rearrange space in Metal shop to make room for the new Tormach.</del>  
 +  - <del>- Access control system at Vault entrance - Dan J. </del>  
 +  - <del>- Install handle on exterior door of vault hallway. </del>  
 +  - <del>- Organize the paint room shelves. Dust off cans. Done by Marie Gentil. </del>  
 +  - <del>- Anchor the crane in the metal shop. (5/8 wedge anchors at least 2-3/4 deep. see Markus)</del>   
 +  - <del>- Clean and repair new used grill. </del>  (Done by Dan Luglio) 
 +  - <del>- Move Punch Press to leather working Area. </del>  
 +  - <del>- Install the Milwaukee Tool fob cabinets in the metal Shop. See Markus.</del>  
 +  - <del>- Build a large rolling island with cabinets below for storage</del> (Tom Gondek) 
 +  - <del>- Craft Lab: - Organize scrap materials, throw away silly (e.g. tiny and/or unusable) pieces, Organize and evaluate supplies with Make-a-thon in mind.</del> 
 +  - <del>Cut off the ends sticking out from the gray rolling stairs. (see Markus)</del> 
 +  - <del>Reinforce Tall storage. The storage needs to be emptied then see Markus</del> 
 +  - <del>Check and fix/get a new toilet seat for the far mens room toilet see Tony W.</del> 
 +  - <del>Install suspended electrical hookup above craft lab table. (Colleen and Markus)</del>   
 +  - <del>Tear apart green particle board cart in front of pallet racks that used to belong to Marc Ownley.</del>  
 +  -<del> Remove fluorescent lights in vault hallway in spaces VA103 & VA104. (brought in by Matt Melk).</del>
   - <del>Build a box for Charcoal filters for the laser cutter exhaust system.</del>Completed by Markus, Tony W., Brant    - <del>Build a box for Charcoal filters for the laser cutter exhaust system.</del>Completed by Markus, Tony W., Brant 
   - <del>Replace the ceiling tiles in the vault hallway</del> Tom G.   - <del>Replace the ceiling tiles in the vault hallway</del> Tom G.
spaceprojs.txt · Last modified: 2022/12/16 18:12 by wildapricot-schultz_hannah