This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
spacedocumentation:lasercutterinkscape [2015/12/15 01:24] dennisd created |
spacedocumentation:lasercutterinkscape [2017/06/14 00:57] tony3 |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | It is no longer necessary to go through CorelDraw to get a drawing from Inkscape to the laser cutter. | + | ====== Using Inkscape with the Laser Cutters ====== |
+ | It is no longer necessary to go through CorelDraw to get a drawing from Inkscape to the laser cutter. | ||
- | - In Inkscape, | + | - Open Inkscape |
+ | - Under Stroke Style, set Width to 0.001in (or 0.025mm) for all of your lines. | ||
- Make sure your line colors match one of the supported colors on the laser cutters (see wall chart on laser cutter room wall for the list). | - Make sure your line colors match one of the supported colors on the laser cutters (see wall chart on laser cutter room wall for the list). | ||
- | | + | - Save your document as a PDF, selecting ' |
- | | + | - On the laser cutter PC, open the PDF using Adobe Reader. |
- | - On the laser cutter PC, open the PDF using Adobe Reader | + | - Print the document from Adobe Reader, setting the print properties per the [[spacedocumentation/ |
- | - Print the document from Adobe Reader, setting the print properties per the laser cutter | + | |
+ | ===== Alternate System ===== | ||
+ | Here is a different path that worked better for me - Lance | ||
+ | |||
+ | - In Inkscape, prepare your image (like above) | ||
+ | - Save your document as a **PostScript Level 3** file. | ||
+ | - import the image into Corel Draw | ||
+ | - Follow the normal printing process through Corel (you may need to verify line widths) |