User Tools

Site Tools


spacedocumentation:lasercutterdriversetup

This is an old revision of the document!


Installing laser cutter drivers on your personal computer

Download the appropriate V-series ULS drivers on your computer, and uncompress to a directory where you can find it later.

Windows 10 Network Printer Configuration

  1. Click the “Windows” button, and type “Devices and Printers” and hit enter
  2. Click the “Add a Printer” button
  3. Click “The printer I want isn't listed”
  4. Click the “Add a printer using a TCP/IP address or hostname” radio button and click “Next”
  5. Select Device Type “TCP/IP Device”
  6. Enter the TCP/IP address address for the laser cutter you want to configure: (10.1.1.21 for the 60 watt). Uncheck “Query the printer and automatically select the driver” checkbox, then click “Next.” Wait a while…
  7. Leave the “Standard” device type radio button selected, and leave “Generic Network Card” selected. Click “Next”
  8. Click “Have Disk” and navigate to the folder where you uncompressed the drivers
  9. Select “V-460” for the printer model
  10. Give your printer a name, and click “Next” and you're done.
spacedocumentation/lasercutterdriversetup.1456277531.txt.gz · Last modified: 2016/02/24 01:32 by keithm