Differences

This shows you the differences between two versions of the page.

--- spacedocumentation:cnc [2016/05/11 20:31]
spilon created
+++ spacedocumentation:cnc [2016/05/11 23:28]
chrish
@@ Line 9: / Line 9: @@
 . CNC router feed rates are DIFFERENT!!! But some of the concepts are similar.
-. DONT run to slow!!! You are not "babying" the tool or "making your tools last longer" by running slow, what happens is your not taking enough of a cut and your just rubbing generating heat, it will cut fine for a little while then your tool is shot.
+. DONT run too slow!!! You are not "babying" the tool or "making your tools last longer" by running slow, what happens is your not taking enough of a cut and your just rubbing generating heat, it will cut fine for a little while then your tool is shot.

Milwaukee Makerspace Wiki