User Tools

Site Tools


projects:wienermobile

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
projects:wienermobile [2017/10/04 02:09]
raster [Motor Controller]
projects:wienermobile [2017/10/04 02:11] (current)
raster
Line 42: Line 42:
  
 We've broken out all the wires to a screw terminal block, numbered them, and added a label showing what is what. The connectors on the right side all have ring terminals crimped on them, and a bit of hot glue where the wire goes in as strain relief. The wires on the left (controller) side are all just put in by bare wire, but there is a lot of hot glue holding things in place. We've broken out all the wires to a screw terminal block, numbered them, and added a label showing what is what. The connectors on the right side all have ring terminals crimped on them, and a bit of hot glue where the wire goes in as strain relief. The wires on the left (controller) side are all just put in by bare wire, but there is a lot of hot glue holding things in place.
 +
 +{{:​projects:​program-C-notes.png?&​600|}}
 +
 +Above is the original programming used in Detroit and Milwaukee. (2017-07-24)
 +
 +Below is the programming we set for Pittsburgh, though it has not been tested yet! (2017-10-03)
  
 {{:​projects:​program-c2-notes.png?&​600|}} {{:​projects:​program-c2-notes.png?&​600|}}
 +
 +
  
 The motor controller can be programmed using a special USB cable and Windows software from Golden Motors. The three areas we need to be most concerned with are highlighted in yellow. (We're mainly looking to deliver the most power we can without blowing the 30 amp fuse.) The motor controller can be programmed using a special USB cable and Windows software from Golden Motors. The three areas we need to be most concerned with are highlighted in yellow. (We're mainly looking to deliver the most power we can without blowing the 30 amp fuse.)
projects/wienermobile.txt · Last modified: 2017/10/04 02:11 by raster