User Tools

Site Tools


projects:slidescanner

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
projects:slidescanner [2012/09/04 20:14]
raster
projects:slidescanner [2012/09/04 20:15] (current)
raster [Slide Scanner]
Line 3: Line 3:
 {{ :projects:slidescan01.jpg?nolink&300|}} {{ :projects:slidescan01.jpg?nolink&300|}}
  
-I'd been working on a device to photograph slides to convert them to digital form, and was about 75% done with it. I still had to finish the part that would hold the slides and light them from the rear. I had prototypes, but wanted to laser-cut the final working version, which was basically a box with a light source inside of it. Getting diffused light was difficult, and ground glass is expensive. I did try to make my own ground glass substitute with finely sanded acrylic, and it sort of works, but not well enough... I've abandoned that idea, because I saw this: http://metrixcreatespace.com/post/20108216677/diy-slide-scanner-lets-say-you-have-a-large+I'd been working on a device to photograph slides to convert them to digital form, and was about 75% done with it. I still had to finish the part that would hold the slides and light them from the rear.  
 + 
 +I had prototypes, but wanted to laser-cut the final working version, which was basically a box with a light source inside of it. Getting diffused light was difficult, and ground glass is expensive. I did try to make my own ground glass substitute with finely sanded acrylic, and it sort of works, but not well enough...  
 + 
 +I've abandoned that idea, because I saw this: http://metrixcreatespace.com/post/20108216677/diy-slide-scanner-lets-say-you-have-a-large
  
  
projects/slidescanner.txt · Last modified: 2012/09/04 20:15 by raster