Differences

This shows you the differences between two versions of the page.

--- projects:mmswebcam [2016/05/18 19:22]
raster
+++ projects:mmswebcam [2020/03/09 23:46] (current)
raster
@@ Line 5: / Line 5: @@
 The Milwaukee Makerspace Webcam uploads a new image every five minutes.
-You (and the world) can see it here: http://mkemake.us/webcam
+You (and the world) can see it here: http://apps.2xlnetworks.net/milwaukeemakerspace/webcam/
-The Milwaukee Makerspace Webcam is mobile, and can be pointed away from any member who does not want to be on camera. It also has a gooseneck that can be moved around to point at specific things. (There is a rolling stand as well, which is probably on Pete's shelf if not in use.)
+The Milwaukee Makerspace Webcam is mobile, and can be pointed away from any member who does not want to be on camera. It also has a gooseneck that can be moved around to point at specific things.
 The software is an older version (3.6.9) of [[http://www.evological.com/evocam.html|EvoCam]]. If you want to be trained to use the Milwaukee Makerspace Webcam, talk to Pete.
+The Milwaukee Makerspace Webcam often gets "stuck" where it won't upload images. If that happens, reboot it.
+**Current Status:** As of 2020-02-25 it is working, but still gets stuck sometimes and needs a reboot. (See above.)
 {{:projects:mmswebcam.jpg?nolink&600|}}
-This is attached to the Milwaukee Makerspace Webcam, It provides info you may want to know.
+This is attached to the Milwaukee Makerspace Webcam, it provides info you may want to know.
 {{:projects:tlbotmms.png?nolink&600|}}

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools