• Replaced user interface only; existing relays and other wiring remain in use
• 16mm green LED pushbuttons indicate on/off status
• Buttons available here: http://www.adafruit.com/products/1443

Back to Parent Page: Milwaukee Makerspace Lighting Controller

Showing original 10 zones; consolidated to 7 total in the final version

I sort of destroyed one of the pushbuttons while soldering. I left the soldering iron on the terminals too long and I melted it through the enclosure. Since it was kaput, I tore it apart to see the guts.

Back to Parent Page: Milwaukee Makerspace Lighting Controller