Milwaukee Makerspace Wiki

User Tools

Site Tools

You are here: start » projects » cncroutercontrollerbox
projects:cncroutercontrollerbox

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
projects:cncroutercontrollerbox [2012/01/29 17:13]
raster added the guy who sent me a bunch of buttons 		projects:cncroutercontrollerbox [2012/02/07 03:05] (current)
raster added code
Line 31: Line 31:
   -  Zero Z Axis (MODIFIERKEY_CTRL Z, 0, KEY_ENTER)   -  Zero Z Axis (MODIFIERKEY_CTRL Z, 0, KEY_ENTER)
  
 +
 +===== Code =====
 +
 +I've created a git repository here: https://github.com/raster/CNC-Router-Controller 
  
 ===== TO DO ===== ===== TO DO =====
Line 36: Line 40:
     * Assemble the materials.     * Assemble the materials.
        * I've got the Teensy, and have some buttons coming in this week.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/02 14:27//         * I've got the Teensy, and have some buttons coming in this week.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/02 14:27// 
-    * Measure the cross-beam to see what size box makes sense.+    * Measure the cross-beam to see what size box makes sense. (Done)
     * Determine how to attach the box to the cross-beam. (Velcro? Magnets? Other?)     * Determine how to attach the box to the cross-beam. (Velcro? Magnets? Other?)
        * (the cross beam is carbon fiber -- magnets are not likely to help)        * (the cross beam is carbon fiber -- magnets are not likely to help)
        * (I've got a stack of really strong rare earth magnets, maybe we could just glue on a few?)        * (I've got a stack of really strong rare earth magnets, maybe we could just glue on a few?)
-    * Determine the layout of the buttons. (See Below) +    * Determine the layout of the buttons. (Mike will be working on this.) 
-    * Create the box. (For fun, I think we should make it with the CNC Router.) +    * Create the box. (Will be done on the laser cutter.)
-    * Make a nice looking control panel. (Use the Laser Cutter to etch the labels?)+
     * Program the Teensy based on the keyboard commands we need to emulate.     * Program the Teensy based on the keyboard commands we need to emulate.
       * This is 90% done.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/07 17:24//       * This is 90% done.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/07 17:24//
     * Test it out!     * Test it out!
       * Initial testing was positive.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/10 19:16//       * Initial testing was positive.  --- //[[pete@rasterweb.net|Pete Prodoehl]] 2012/01/10 19:16//
- 
  
  
 **Control Panel Layout:** **Control Panel Layout:**
  
-{{:projects:cnccontrollermock03.png?nolink&|}}+{{:projects:cnccontrollermock04.png?nolink&|}} 
  
 Inkscape illustration of the control box panel. This file will be used to laser cut the box. Inkscape illustration of the control box panel. This file will be used to laser cut the box.
Line 59: Line 62:
    * [[Members/RonBean|Ron Bean]] (CNC Expert)    * [[Members/RonBean|Ron Bean]] (CNC Expert)
    * [[members:peteprodoehl|Pete Prodoehl]] (Builder/Programmer)    * [[members:peteprodoehl|Pete Prodoehl]] (Builder/Programmer)
 +   * [[Members/JasonGessner|Jason Gessner]] (Donator of parts)
    * Dithermaster (Donator of parts)    * Dithermaster (Donator of parts)
    * Mike Massie (Designer)    * Mike Massie (Designer)
  
  
projects/cncroutercontrollerbox.1327857203.txt.gz · Last modified: 2012/01/29 17:13 by raster

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki