User Tools

Site Tools


projects:cncplasmacutter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
projects:cncplasmacutter [2013/05/22 11:56]
bigjoe [Project Members]
projects:cncplasmacutter [2013/06/25 12:02]
bigjoe
Line 1: Line 1:
 ====== CNC Plasma Cutter ====== ====== CNC Plasma Cutter ======
-The goal of this project is to build a CNC plasma cutter capable of cutting a piece of metal 4'x8' This is my first CNC machine, so it will take some time to complete it because I will need to learn everything along the way.  This is a fairly large project and I certainly would not take it on without the help and support of the Milwaukee Makerspace.+The goal of this project is to build a CNC plasma cutter capable of cutting a piece of metal 4'x8' This is my first CNC machine, so it will take some time to complete because I will need to learn everything along the way.  This is a fairly large project and I certainly would not take it on without the help and support of the Milwaukee Makerspace.
  
 This was the first project I talked about at the space and was met with a lot of enthusiasm.  I did some reading and found several designs out there and have selected one that I think is the most reasonable and easiest to build accurately.  Here is a link to the site I am getting the most info from: http://www.cncrouterparts.com/  This was the first project I talked about at the space and was met with a lot of enthusiasm.  I did some reading and found several designs out there and have selected one that I think is the most reasonable and easiest to build accurately.  Here is a link to the site I am getting the most info from: http://www.cncrouterparts.com/ 
projects/cncplasmacutter.txt · Last modified: 2013/06/26 02:46 by bigjoe