Milwaukee Makerspace Wiki

User Tools

Site Tools

You are here: start » projects » cncplasmacutter
projects:cncplasmacutter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
projects:cncplasmacutter [2013/05/22 04:48]
bigjoe [Project Members] 		projects:cncplasmacutter [2013/06/25 12:02]
bigjoe
Line 1: Line 1:
 ====== CNC Plasma Cutter ====== ====== CNC Plasma Cutter ======
-The goal of this project is to build a CNC plasma cutter capable of cutting a piece of metal 4'x8'.  This is my first CNC machine, so it will take some time to complete it because I will need to learn everything along the way.  This is a fairly large project and I certainly would not take it on without the help and support of the Milwaukee Makerspace.+The goal of this project is to build a CNC plasma cutter capable of cutting a piece of metal 4'x8'.  This is my first CNC machine, so it will take some time to complete because I will need to learn everything along the way.  This is a fairly large project and I certainly would not take it on without the help and support of the Milwaukee Makerspace.
  
 This was the first project I talked about at the space and was met with a lot of enthusiasm.  I did some reading and found several designs out there and have selected one that I think is the most reasonable and easiest to build accurately.  Here is a link to the site I am getting the most info from: http://www.cncrouterparts.com/  This was the first project I talked about at the space and was met with a lot of enthusiasm.  I did some reading and found several designs out there and have selected one that I think is the most reasonable and easiest to build accurately.  Here is a link to the site I am getting the most info from: http://www.cncrouterparts.com/ 
Line 27: Line 27:
 It is really hard to list everyone that has or will help with this project as there have been so many people help with this project, from brainstorming to helping me source materials to teaching me how to use the tools needed to draw and build the hardware to testing electronics and building models.  This is really a group effort and everyone has helped me in some capacity and I would like to thank the entire membership as without your help and support, I would not be able to do this project. It is really hard to list everyone that has or will help with this project as there have been so many people help with this project, from brainstorming to helping me source materials to teaching me how to use the tools needed to draw and build the hardware to testing electronics and building models.  This is really a group effort and everyone has helped me in some capacity and I would like to thank the entire membership as without your help and support, I would not be able to do this project.
      
-   * [[members:bigjoerodrigu|Joe Rodriguez]] Lead+   * Joe Rodriguez - Lead
    * Ed Cramer - Electronics expert    * Ed Cramer - Electronics expert
    * Bill Murray - Solidworks modeling    * Bill Murray - Solidworks modeling
projects/cncplasmacutter.txt · Last modified: 2013/06/26 02:46 by bigjoe

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki