User Tools

Site Tools


projects:cancuber

Tom G's Can Cuber

Photos

Background

Born out of Tom's desire to see how small he could make an aluminum can. Also we go through a lot of soda and canned drinks at the buildings. Crushing cans

Appearances

  • Maker Faire 2024
  • Maker Faire 2023

Specs

  • Motor
  • Ram #1: 2,000 lb-Force
  • Ram #2: 5,000 lb-Force
  • Ram #3: 7,500 lb-Force
  • Two e-stop buttons
  • Capacitive sensor turns the pump on whenever the lever isn't in its normal home position

Trained Users

Notes

  • The machine needs a water heater tray under the cart in case the hydraulic fluids leak
  • If a leak happens, slap an e-stop and unplug the power so the motor doesn't try to run
  • Normal operating level of the fluid reservoir is about half full and below 35 degrees C (86 F)
projects/cancuber.txt · Last modified: 2024/11/06 14:29 by branth