User Tools
Action disabled: source
projects:airassistsign
Table of Contents
Air Assist Reminder Sign
Summary Status
Done. Sign and tags are posted in the Laser Cutter Room.
Description
Posted a sign to remind people of the new laser cutter procedures. Also made valve tags to differentiate between the air regulator and the air supply valve.
Bill of Materials
| Part Desc | Vendor | Part Nbr | Qty | Unit Cost | Total Cost |
|---|---|---|---|---|---|
| Wood | Laser cutter room scrap | n/a | 1 | $0.00 | $0.00 |
Project Tasks
| Task | Status |
|---|---|
| Layout | Done, 10/10/13 |
| Laser cut wood | Done, 10/10/13 |
| Mount/hang | Done, 10/10/13 |
Makerspace Members
projects/airassistsign.txt · Last modified: 2013/10/12 16:21 by branth
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
