Differences

This shows you the differences between two versions of the page.

--- projects:3d_printed_tardis [2013/12/29 03:52]
kennethsbecker [3D Printed Tardis]
+++ projects:3d_printed_tardis [2014/03/08 01:06] (current)
kennethsbecker
@@ Line 4: / Line 4: @@
 __Summary Status for Second Tardis__
-All parts printed and painted.  Found a website to help me determine the size of the resistors to use with the five LEDs and tested it with some LEDs from the 'space.  I need to buy five white ultrabright LEDs
+Switch is wired in.  All parts glued on.  Lights work.  Just need to attach the Police Box signs.
 Click [[http://beckermaker.blogspot.com/search/label/Tardis|here]] to read the posts on my blog about this project.
@@ Line 55: / Line 55: @@
   * Extruder temp: 235 degrees C (I think that helped it not get clogged)
   * Build plate temp: 115 degrees C (This was supposed to help the work stick to the plate.  Not sure it made a difference.)
+Here is a link to the electrical [[http://www.digikey.com/schemeit#nq6|circuit]] for the LEDs.
 ** Project Tasks **
@@ Line 62: / Line 64: @@
   - <del>Print battery holder</del> -- Done
   - <del>Paint all new pieces</del> -- Done
-  - Procure parts for lighting -- In progress
+  - <del>Procure parts for lighting</del> -- Done
-  - Assemble lighting -- Not started
+  - <del>Assemble lighting</del> -- Done
-  - Assemble Tardis and test lighting -- Not started
+  - <del>Find switch</del> -- Done
+  - <del>Install switch into light circuit</del> -- Done
+  - <del>Assemble Tardis and test lighting</del> -- Done
   - Attach signs -- Not started
   - Donate original Tardis to Makerspace for sonic screwdriver holder -- Not started
 Makerspace members: [[members:ken_becker|Ken Becker]]

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools