User Tools

Site Tools


projects:3d_printed_tardis

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
projects:3d_printed_tardis [2013/11/16 19:10]
kennethsbecker
projects:3d_printed_tardis [2014/03/08 01:06] (current)
kennethsbecker
Line 4: Line 4:
 __Summary Status for Second Tardis__ __Summary Status for Second Tardis__
  
-Printed the door, all three sides, the bottom, and top pieces.+Switch is wired in.  All parts glued on.  Lights work.  Just need to attach the Police Box signs.
  
 Click [[http://beckermaker.blogspot.com/search/label/Tardis|here]] to read the posts on my blog about this project. Click [[http://beckermaker.blogspot.com/search/label/Tardis|here]] to read the posts on my blog about this project.
Line 55: Line 55:
   * Extruder temp: 235 degrees C (I think that helped it not get clogged)   * Extruder temp: 235 degrees C (I think that helped it not get clogged)
   * Build plate temp: 115 degrees C (This was supposed to help the work stick to the plate.  Not sure it made a difference.)   * Build plate temp: 115 degrees C (This was supposed to help the work stick to the plate.  Not sure it made a difference.)
 +
 +Here is a link to the electrical [[http://www.digikey.com/schemeit#nq6|circuit]] for the LEDs.
  
 ** Project Tasks ** ** Project Tasks **
-  - <del>Reprint top pieces with higher infill</del> -- Done 
   - <del>Print second set of sides</del> -- Done   - <del>Print second set of sides</del> -- Done
-  - Print new lamp parts -- Not started +  - <del>Reprint top pieces with higher infill</del> -- Done 
-  - Print battery holder -- Not started +  - <del>Print new lamp parts</del> -- Done 
-  - Paint all new pieces -- Not started +  - <del>Print battery holder</del> -- Done 
-  - Purchase parts for lighting -- Not started +  - <del>Paint all new pieces</del> -- Done 
-  - Assemble lighting -- Not started +  - <del>Procure parts for lighting</del> -- Done 
-  - Assemble Tardis and test lighting -- Not started+  - <del>Assemble lighting</del> -- Done 
 +  - <del>Find switch</del> -- Done 
 +  - <del>Install switch into light circuit</del> -- Done 
 +  - <del>Assemble Tardis and test lighting</del> -- Done
   - Attach signs -- Not started   - Attach signs -- Not started
   - Donate original Tardis to Makerspace for sonic screwdriver holder -- Not started   - Donate original Tardis to Makerspace for sonic screwdriver holder -- Not started
  
 Makerspace members: [[members:ken_becker|Ken Becker]] Makerspace members: [[members:ken_becker|Ken Becker]]
projects/3d_printed_tardis.1384629050.txt.gz · Last modified: 2013/11/16 19:10 by kennethsbecker