Summary Status

Second Tardis

Printed the door and all three sides.

Click here to read the posts on my blog about this project.

First Tardis

All parts are printed and painted. The Tardis is assembled. Gave it to Dmitry. He likes it.

I wanted to add lights but ran out of time. That will have to be part of the second try. I'd like to print a second Tardis now that I know more about how the printer works. The top pieces are weak since the infill setting was too low the first time. I also want to add the LEDs and a small battery.

I wonder how hard it would be to add the Tardis sound when a button is pushed…

Ahhh, Dr. Who. A British classic loved by generations of slightly different characters. My son happens to be one of those people who are fans of the good doctor. So, when I saw plans for a Tardis on Thingiverse, I knew I had to make it.

The 3d print plans seem to be one of the better sets on Thingiverse. Printing them on the Makerbot 3D printer is very easy. All you need is the files, and a computer with the MakerWare software, or an SD card. The Makerware software will turn the drawing files into g-code files that the Makerbot can understand and send the files to the printer or SD card. If MakerWare saves the g-code data onto the SD card, insert it into the Makerbot and fire it up.

Here are some of the things I learned while doing this project.

• Clean the printing surface before starting a print.
• Clean around the nozzle head before starting a print.
• Uninstall the filament, cut off the end, and reinstall it before printing to ensure that the filament was flowing at the start of the print.
• Next time, I am going to try printing a ramp for some of the pieces that did not stick well.
• I also read that leveling the printing surface is crucial to getting a good print. Need to do this before every print.

The print settings that I used for most pieces were:

• Infill: 30%
• Shells: 2
• Layer height: .20 mm
• Extruder temp: 235 degrees C (I think that helped it not get clogged)
• Build plate temp: 115 degrees C (This was supposed to help the work stick to the plate. Not sure it made a difference.)

1. Download Tardis files from Thingiverse – Done
2. Print all pieces on Makerbot – Done
3. Paint pieces navy blue – Done
4. Assemble Tardis – Done
5. Attach signs – Done

The print settings I am using for most pieces on the second Tardis are:

• Infill: 90%
• Shells: 2
• Layer height: .20 mm
• Extruder temp: 235 degrees C (I think that helped it not get clogged)
• Build plate temp: 115 degrees C (This was supposed to help the work stick to the plate. Not sure it made a difference.)

1. Reprint top pieces with higher infill – Done
2. Print second set of sides – Done
3. Print new lamp parts – Not started
4. Print battery holder – Not started
5. Paint all new pieces – Not started
6. Purchase parts for lighting – Not started
7. Assemble lighting – Not started
8. Assemble Tardis and test lighting – Not started
9. Attach signs – Not started
10. Donate original Tardis to Makerspace for sonic screwdriver holder – Not started

Makerspace members: Ken Becker