User Tools

Site Tools


projects:2015ventilationprojects

This is an old revision of the document!


2015 Ventilation Projects

  • Keeping these all on one page for the moment
  • Will probably break them off as they get further along and/or completed
  • Being led by BrantH and Larry and

Welder Exhaust Fan Filter Box

  • 01/10/15 - Lance and Tom requested $50 from BOD for metal framing
  • 01/19/15 - Alex M. is interested in helping
  • 01/25/15 - Brant, Lance, and ChrisH built a frame
  • 02/10/15 - Brant made a sheet metal top for the box
  • 02/14/15 - Brant, Adrian, and Jake hung the filter box
  • 02/19/15 - Tom and Brant proposed reusable filters be purchased
  • 03/13/15 - Filters cut to size and installed, done

Ceramics Kiln

  • 12/02/14 - Bill^2 donated a blower fan
    • Torrington, Hubbell Special Products #33S0VSC
    • PSC, 3 speed
    • 115v/1phz/60hz
    • 1/15 HP, max 1 amp
    • Wiring:
      • White = neutral
      • Green = ground
      • Red = low (77 watts, 0.82 amps)
      • Blue = medium (114 watts, 1.18 amps)
      • Black = high speed (211 watts, 2.07 amps)
  • 01/04/15 - Tom bought a sheet metal hood at an auction
  • 03/08/15 - Installed controls and conduit, pulled wire
  • Need ducting or routing out of the building

Paint Room Exhaust Filters

  • ?/?/?? - Lance and Tom proposed stuff to the BOD
  • 03/13/15 - Mounted wood nailer and metal frames
  • 03/20/15 - Filter media installed

PCB Fume Hood Fan

  • Tom brought in some flexible ducting
  • Do we want to vent this hood?
projects/2015ventilationprojects.1427039177.txt.gz · Last modified: 2015/03/22 15:46 by branth