projects:2015ventilationprojects

Table of Contents

2015 Ventilation Projects

2015 Ventilation Projects

Keeping these all on one page for the moment
Will probably break them off as they get further along and/or completed
Being led by BrantH and Larry and

Welder Exhaust Fan Filter Box

01/10/15 - Lance and Tom requested $50 from BOD for metal framing
01/19/15 - Alex M. is interested in helping
01/25/15 - Brant, Lance, and ChrisH built a frame
02/10/15 - Brant made a sheet metal top for the box
02/14/15 - Brant, Adrian, and Jake hung the filter box
02/19/15 - Tom and Brant proposed reusable filters be purchased
03/13/15 - Filters cut to size and installed, done

Ceramics Kiln

12/02/14 - Bill^2 donated a blower fan
- Torrington, Hubbell Special Products #33S0VSC
- PSC, 3 speed
- 115v/1phz/60hz
- 1/15 HP, max 1 amp
- Wiring:
  - White = neutral
  - Green = ground
  - Red = low (77 watts, 0.82 amps)
  - Blue = medium (114 watts, 1.18 amps)
  - Black = high speed (211 watts, 2.07 amps)
01/04/15 - Tom bought a sheet metal hood at an auction
03/08/15 - Installed controls and conduit, pulled wire
04/07/15 - Fan supports/hanging brackets
04/11/15 - Welded supports, hung fan
04/16/15 - Cored hole in door
05/09/15 - Wired fan, replaced wooden door brace with pipe
06/06/15 - Added hood, pulley, counterweight, and flex duct

Paint Room Exhaust Filters

?/?/?? - Lance and Tom proposed stuff to the BOD
03/13/15 - Mounted wood nailer and metal frames
03/20/15 - Filter media installed

PCB Fume Hood Fan

Tom brought in some flexible ducting
Do we want to vent this hood?

projects/2015ventilationprojects.txt · Last modified: 2015/06/21 06:18 by branth