Space Projects/To-Do

• Door stop bollards - mount the big yellow posts to keep the alley doors from swinging too far. Check with Tom Gralewicz for positioning. We have the tools and bolts at the space.
• Mount the curb blocks - drill some holes and pound rods to keep the curb blocks from moving.
• Paint exterior door frames where the new doors were installed. Caulk when done.
• Finish the exterior south east entrance (vault hall). The ceiling panels door need to be caulked and painted.
• Alley lights
• Switch plate next to the Otjen entrance
• Access control system at Vault entrance - Royce P.
• Paint new brick work outside the building
• Repair broken bricks around the outside of the building.

• Pin ball machine repairs, a never ending project: replace broken flipper.
• Humorously oversized games. Giant Yatzee/Jacks/Scrabble/Craps
• Laser Kaleidoscope
• BADASS 2.0
• Giant Makey-Makey Piano Keyboard
• MAME Cabinet

• Remove the old heater above the back hall from the craft shop so we can hang new lights
• Hang new lights in the craft shop hall.

• Build the chem lab floor - it needs a raised floor so we can run drains and put a sink anywhere in the room and a sink in the dark room
• Install a sink in the chem lab
• Duct part of the vent fan in the chem lab to above the spray nook.

• Install a sink in the dark room

• Fix the 25W laser - find out if its the tube or the power supply.
• Move the exhaust fan for the laser cutters and duct it.
• Swap out the computers in the Laser cutter room for the dual core machines next to the mini CNC router.

• Get an ice maker working in one of the refrigerators (kegerator has one)
• Do something with the VLAT. (Build shelves instead of tables?)

• SMD rack - make a new rack to hold the SMD component reels, label the strips coming out and capture them so they don't unreel.
• Permanent charging station for the fork lift.
• Outlets on the columns in the East room

• Replace the light socket on the vertical band saw.
• Power up the 3 headed drill press (with only 2 heads left.
• Find/make chuck jaws for the South Bend lathe, or mount a chuck that has both sets of jaws.
• Metal storage (vertical storage of bar stock along a wall is organized and space efficient)

It's all good.

• Come up with scrap metal bins to hold small pieces so they don't spill everywhere.
• Gas line for the forge and furnace. -Dan J.
• Mount a good grinder in the welding are for sharpening TIG electrodes.
• Fix the louvers on the weld shop fan so they close correctly.
• Build Auxiliary hammer / forging tool rack. - Dan J.
• Mount small forge in permanent home. - Bill^2 and Dan J.

• Paint new brick work inside the vault hall

• Install the doors with windows: 2 in the south wall of the electronics lab and one between the east room and vestibule.
• PA system/phones - Chris H.
• Wash the carpet - try to get out some of the water stains.
• East and West room lighting automation system - Vishal/Chris H.
• Stripe the exit aisles - add some diagonal stripes so people know what part is aisle.
• Hang speakers and wire sound system - Kevin B.
• Replace steel floor plates with holes in them and reinforce them so they won't bend if the fork lift drives over them.

• Build shelving for mold boxes. -Dan J.
• Build Stock rack for forging material. -Bill M. and Dan J.
• Install Air Lines - Joe R. and Chris H.
• Tool pegboard. Make something to hold pliers and Allen keys better. - Jim Rawson