User Tools

Site Tools


miscellaneous:groupbuys

This is an old revision of the document!


Group Buys

This page is for the membership to track pledges and status for current group buys.

In Progress

50 Ton Ironworker

Champion: Dan J

Get a Geka Minicrop for the forge area Cost: $2000

https://annularcutterbitsharpening.com/shop/ironworkers/geka-ironworker-ironworkers/geka-minicrop-50-ton-ironworker/ http://www.geka-ironworkers.com/geka-ironworkers-es/de/one-cylinder-detailed-information

Name Pledged Collected
Forge Area Funding $500 Y
Dan J $500 Y
Pete P $25 Y
Tom Gr. $100 Y
D Buggs $100 Y
S. Thelen $100 N
Dan G. $50 N
Steve B. $50 N
Power Wheels Area Funding $75 N
Matt G. $100 Y
Steve P $50 N
Adrian V. $25 Y
Kathy C. $100 N
Tony W $100 Y
Bret D. $50 N
Harvey M. $20 N
Matt B. $55 Y
Rik S. $125 N
Total: $2125 $1480
To Go: $-125 $520

20" Rockwell Bandsaw for Wood Shop

Champion: Rick P.

We acquired a 20“ Rockwell bandsaw for $500. We are asking members to toss in a few extra bucks to the wood shop fund to defray the cost. Our goal is to raise $250 toward this purchase.

This saw will be equipped with a wide blade capable of handling larger wood pieces. The idea is to have this saw setup for making straight cuts on larger pieces of material while the current band saw will be outfitted with a narrower blade for making radius cuts. Both machines will have appropriate limitations posted on the front cover. The current bandsaw breaks blades quite often because users are trying to cut large pieces on a narrow blade or radius cuts on a wide blade, both cases overstressing the blade. Our hope is having two machines to fit both needs will meet everyone's needs.

Name Pledged Collected
Pete P $10 $10
$
$
$
Total: $10 $10
To Go: $250 $250

Completed Group Buys


uArm Swift Pro Robotic Arm

Champion: Pete P.

A used uArm Swift Pro with the following items: Base Board Extension, Seeed Grove Extension, Mounting Block for Seeed Grove and OpenMV, Open MV Kit, Universal Holder, 3D Printer Kit (with approx. 30g of filament included), 4th Axis with Suction Cup, Gripper, Laser Kit (laser safety glasses included) - Total needed is $520.00 - Completed on 2019-03-05

Name Pledged Collected
Pete P $75 $75
Charlie $50 $50
Larry $100 $100
Tim C. $50 $50
Jake $25 $25
Marcin $50 $50
Matt B. $50 $50
Paul S $5
Tony W $50 $50
Daniel G. $25 $25
D Buggs. $40 $40
Total Amount: $520 $465
To Go: $0 $5

Tormach 4th axis rotary table

Champion: Markus

Get a new 4th axis for the Tormach

34123 - 6” Super Spacer Motorized Rotary Table

Cost: $1800

https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34123

Google Group Discussion: https://groups.google.com/forum/#!topic/membersonly-milwaukeemakerspace/AgNgAG7pKA4 (The above discussion thread is on the members only msg board, you need to be logged in to view it.)

Donations:

Name Pledged With Match Collected
Shawn 1:1 $900 fund match $900 $0 remain of match Y (MMS)
Markus $300 $600 Y (MMS)
Machine Shop area funds $250 $500 Y (MMS)
Logan Mailandt $50 $100 Y (MMS)
Mat M. $20 $40 Y (MMS)
Metal Finishing $75 $150 Y (MMS)
Richard Bowman $25 $50 Y (MMS)
Tony (see msg brd.) $100 $200 Y (MMS cash)
Steve P $50 $100 Y (MMS)
Marc Beroukas $60 $90 Y (MMS)
Total: $1830 $1680
To Go: $0 0

Woodshop 8" Spiral head Jointer

Champion: Steve P

Get new Grizzley 8“ spiral head jointer

Grizzley G0490X

Cost: $1525.00 shipped

http://www.grizzly.com/products/8-Jointer-with-Parallelogram-Beds-and-Spiral-Cutterhead/G0490X Google Group Discussion: https://groups.google.com/forum/#!topic/milwaukeemakerspace/1HLX1wbiuGM

Donations:

Name Pledged Collected
Woodshop area funds $550 Y (MMS)
Steve P $500 $300 (MMS)
Lemondealc(new member from msg board) $100 No
Mark W. $50 No
Mat Melk $20 Y (MMS)
Jeremy Jones $50 Y (MMS)
Dillan Laughlin $50 Y (MMS)
Ben Sherman $100
Bill R $155 Y (MMS)
Anonymous $100 Y (MMS)
Total: $1575 $1325
To Go: $-150 $250

Metal Shop Gear-head Lathe

Champion: Tom K Wiki Helper: Steve P

Get a second lathe for the metal shop that has a larger capacity and more power. People would need to be signed off and make a couple projects on the smaller existing Southbend lathe.

Name Pledged Collected
Marcus Will Match up $1000
Bob K $500
Steve $100
James T $250
Marc B $100

2" button maker dies and supplies

Champion: BrantH

Supplies on their way, 2” dies already in the cabinet in Craft Lab
New dies will work with existing button maker

Pledge Participants

Name Pledged Paid Payment Type
Brant $20 $20 Cash
Lexie $20 $20 Cash
Larry A $20 $20 Cash
Kathy H $20 $20 Cash
Karen P $5
Rick B $? $?
Individual pledges: 6
Total pledged: $85
Collected: $80
Still Owed: $5

New Electric Kiln

Champion: Jeff M

Get new Kiln Skutt KM1227-3PK

Cost: $4406

https://skutt.com/products-page/ceramic-kilns/km-1227pk/

Google Group Discussion: https://groups.google.com/forum/#!topic/milwaukeemakerspace/RU83b0yee8M

Name Pledged Collected
Ceramics Area Funding $400 Y (MMS)
Bay View Community Fund Grant $1000 Y (MMS)
Jeff M $1000 Y (MMS)
Pete P $25 Y (MMS)
Ben L $25 Y (MMS)
Vicky & Dillan $100 Y (MMS)
Kathy Hughett $100 Y (MMS)
Bill Reid $100 Y (MMS)
S.V. Lindblad $100
Mat M $30 Y (MMS)
Welding/fordging area $100 Y (MMS)
Machine Shop $200 Y (MMS)
MMS Board $1000 Y (MMS)
Ellen (korteco) $50 Y (MMS)
Phil Gonzales $176 Y (MMS)
Sean Derby $100 Y (MMS)
Remaining $-100.00 $0

Pan and Box Brake

Champion: Dan J

Get a 48“ Pan and Box Brake for the forge area Cost: $2144

http://www.grizzly.com/products/48-Pan-Box-Brake-12-Gauge/G0542

Name Pledged Collected
Forge Area Funding $1143 Y
Joe R $102 Y
Dan J $100 Y
Tom Gra $100 Y
Sam L $100 Y
William R $100 Y
Rick P $110 Y
Tony W $50 Y
Pete P $25 Y
Machine Shop Funding $150 Y
Welding Shop Funding $164 Y

Plastic Injection Molding Machine

Champion: Steve P

Lets make stuff from plastic, add your pledge below…. We can make molds using the Tormach!!!

This is on an auction site no guarantees here. Note: I'v kept the naming of the machine vague here so outside prospective bidders don't stumble across it while researching it. Please do not post the make, model, or location of the machine until the auction concludes Dec 19 in the evening.

Pledge Participants

Name Pledged Paid Payment Type
Steve P $20 $20 Cash
Pete P $10 $10 PayPal to Larry
Larry A $100 $100 Cash
Harvey M $10 $10 Cash
Tom Gon $30
Evl Google $150 $150 Cash
Isaac S $20 $20 Cash
Jason M $20 $20 Cash
Tony W $40 $40 Cash
Individual pledges: 9
Total pledged: $400
Collected: $370
Still Owed: $30

Fire at Kennedy Middle School, Germantown

Organizer: Brant

Goal: None

Summary

It was determined that a fire had started in a bank of battery chargers. The fire spread to the entire stand of batteries and chargers. One school employee was taken to the hospital due to smoke inhalation suffered while using a fire extinguisher. The fire was contained to the robotics laboratory. Damage is estimated at $45,000 to $50,000. Fox6 article

Let's see if we can help get the school's Robotics Lab up and running again.

Donations

Pledged
  • Bill^2 - $25 PAID
  • Keith - $25 PAID
  • Kent - $25 PAID
  • Brant - $25 PAID
  • The Handsomest Landscaper - $5 PAID
  • Lance - $20 PAID

Total: $125 - DELIVERED!


Wood Shop Air Filter Repairs

Champion: Brant

Needed Items

  • 1/6 HP, 115v motor (purchased and installed!)

Participants

  • Felisha $35
  • Brant $15
  • Dillan L. $25
  • Jack S. $20
  • Harvey $10
Unpaid List
  • Joseph R. $20
  • Vishal $25
  • Asim A. $20
  • DL $20

Current Total Pledged: $180

Current Total Paid: $85


Salvaged Leaf Battery Packs

Organizer: Pete

Goal: $256

Summary

The Milwaukee Makerspace Racing Team is buying some battery packs salvaged from a Leaf electric car. They will be used for a new vehicle for the Power Racing Series.

Donations

Pledged
  • Vishal: $20
  • Wild Apricot: $181
  • From last purchase: $33
  • Pete: $10 - PAID
  • Kathy: $15 - PAID

Total: $249


Aluminum Anodizing Workstation

South Bend Digital Readout

Organizer: Steve Pilon

Summary

The South Bend lathe would be much more useful if it had a digital read out, a digital readout(DRO) measures the actual movement of the axis and then displays the information on a screen. The Bridgeport mill along with the Gorton mill already have DROs. Using DROs account for backlash and generally make it easier for beginners and advanced users to make accurate parts.

Options

Android DRO
Chinese EBay Kit
DRO Pros
  • Referenced from Markus's comment on MMS msg board
  • Markus Schneider Proposed
  • $500-$600 Glass scales (1-3 year warranty)
  • $1000 Magnetic (6 year warranty)

Donations

  • Steve Pilon: $45 Paid
  • Markus: $300-$400
  • Tom Gralewicz: $50
  • Larry Andersen: $100 Paid
  • James Tiederman: $40
  • Tony W. :$100 Paid

Metal Shop CNC Milling Machine

Champion: Larry Andersen

We are purchasing a Tormach 770 Vertical Milling Center with automatic tool changer. It is currently being used as a demo machine in their lobby. Until we pick it up we're unsure what options will be included.

http://www.tormach.com/product_pcnc_770.html?gclid=CPrVmpfUoM0CFdcYgQode9wPzQ

Pledge Participants

Name Pledged Paid Payment Type
Larry Andersen $5000 YES Check
Tom Gralewicz $1000 YES Check
Pete Prodoehl $50 YES PayPal
Lance Lamont $100 YES Cash
Dan Jonke $50 YES PayPal
Vishal $100 YES PayPal
Have Blue $100 YES PayPal
Brant $50 YES Drop box
Harvey $100 YES Cash
Tony W $200 YES Dwolla
Tony W (Match) $800 YES Dwolla
Joe Rodriguez $1200 YES Check
Dan Felix $300 YES Dwolla
Adam Cohen $100 YES Paypal
Steve Pilon $100 YES Dwolla
Devin $10 YES Cash
Jon H. $100 YES Cash
Adrian Volden $150 YES Drop Box
Chris Harper $300 YES Paypal
Bret Daniel $50 YES Drop Box
Rik Stardy $60 YES Cash
David Buggs $100 YES Paypal
Markus Schneider $300 YES Drop Box
Carl $20 YES Cash
Mark Rehorst $40 YES Cash
John Minderman $10 YES Cash
Jim $20 YES Cash
Dale Noll $30 YES Cash
Dillan Laughlin $100 YES Paypal
Jerry $100
Steven L. Barnicki $200
Individual pledges: $ 4,940
Matching pledges $ 5,740
Total pledges and match: $10,680
Collected: $10,440
Still Owed: $ 300

60 Watt Laser Cutter Bearings/Rebuild

Buy a selection of components to refurbish the 60 watt laser cutter: - Bearings - Rubber “wheels”

Google Group Post: https://groups.google.com/d/msg/membersonly-milwaukeemakerspace/MgFw7rqnPCY/qJE51RupgWUJ

More Information: <insert link>

Goal: $252

Deadline: ASAP

Champion: Shane T./Tom Gr.

Items ordered 10/13

Participants

  • Shane T.: $25 Paid
  • Felisha: $25 Paid
  • Brant: $25 Paid
  • Adrian: $25 Paid
  • Scott S.: $25
  • Kevin K.: $5
  • Rich P.(Minion): $25
  • Lance L.: $20 Paid
  • Katherine L.: $20
  • Andrew K.: $20 Paid
  • Richard B.: $15
  • Karyn: $30 Paid
  • Keith M.: $50 - paid - check 10/14/14
  • Bill Murray $50 Paid

Current Total: $310

Current Paid: $200


Tesla Museum Brick

Goal: $350 for 1 brick, $1200 for a 4 brick array

Deadline: November 8, 2014

Champion: Vishal

Participants

  • Brant: $25 - paid
  • HaveBlue: $25 - paid
  • bob.trocke: $25 - paid
  • Vishal: $25 - paid
  • Joe Rodriguez: $25 - paid
  • Bill*2: $25 - paid
  • Lance L.: $25 - paid
  • Keith: $25 - paid
  • Shane: $25 - paid
  • Tom Gralewicz $25 - paid
  • David Buggs $25
  • Dan Jonke $25
  • Dennis Draheim $25

Total Pledges: $325

Total Pledges Paid: $250


Plastic Bending Machine

Buy a plastic bending machine for bending acrylic and other plastics

Google Group Post: https://groups.google.com/forum/#!topic/membersonly-milwaukeemakerspace/z9NEl1RIRqE

More Information: https://www.inventables.com/technologies/plastic-bending-machine

Goal: $165

Champion: Vishal

Participants

  • Vishal Rana: $25 - Paid
  • Brant Holeman: $20
  • Ellen Fulton: $20 - Paid
  • Adrian Volden: $10 - Paid
  • Isaac Salapat: $10 - Paid
  • Tami Weiss: $25 - Paid
  • DL Swanson: $20
  • Karen Pauli: $10
  • Lance Lamont: $20 - Paid
  • Cobie Howard: $15 - Paid

Total Pledges: $165

Total Pledges Collected: $80


Cartesian Co. Circuit Printer

Goal: $1599(Kit) or $2099(Assembled)

Deadline: ASAP

Champion: Deboralynn (DL)/Tom Gr.

Participants

  • Adam Cohen: $50 Paid
  • Tom Gralewicz: $200 Paid
  • Larry Andersen: $50 Paid
  • Jakob Marasch:$50
  • DL: $100 Paid
  • Keith : $100 Paid
  • David Buggs: $200 Paid
  • Dennis Draheim: $200 Paid
  • Vishal Rana: $150 Paid
  • Royce: $200 Paid
  • Jim Rawson: $130
  • Pete: $10
  • Rob Richards $50 Paid
  • Digital Dentis $20 Paid

Current Total: $1,440

Current Paid: $1300

miscellaneous/groupbuys.1556066136.txt.gz · Last modified: 2019/04/24 00:35 by dan_dude