• Project Updates (Show & Tell!) from Members
• Member Recognition for Awesomeness
• Membership Sign-ups
• Guest & New Member Introductions
  • Board of Directors and Area Champion Introductions
• Meeting adjourns

• For a long, happy, healthy membership at the Makerspace: be sure to NEVER use the craft lab scissors outside of the craft lab.
• Seriously, these fine cutting tools should only be used where appropriate (e.g. cutting fabric)
• If you have questions, ask Kathy H or Karen P.
• When it comes to the craft lab scissors it is NOT better to ask for forgiveness than ask for permission.

• Events for 2021

• Metal can be, and frequently is, both sharper and hotter than it looks.

• A section from the New Member Pamphlet (on the WIKI): Donations go to the hack-rack, but remember the rule is if you donate something to the hack-rack you must take something away of equal volume. If its something larger or you don't want to take anything from the hack-rack you should post to the public message board first before donating. Only donate if you can find a person interested in the donation.
• As the Woodshop Champion wrote on the woodshop door white board: a hack rack is not a dumpster.

* Carl S: FUSION 360 classes are now held at NORWICH (moving from Lenox) at 7 PM. Classes can be attended in person, or virtually (Carl will send you the link). Thank you Carl.

• These classes are now being recorded and are available for viewing on You Tube. Carl will send you the link.

* CERAMICS AND CERVEZAS every Wednesday..

• BYOB and enjoy.

* No heavy equipment in the newly paved parking lot for the next few months as the asphalt hardens. Pls reach out to Tom G, Dan J, Jake B or Rudy if you need to use a fork lift outside the building to load/unload. Do NOT attempt to use the fork lift outside the Norwich building.

* Forge Friday starts this Friday at 6 PM at Norwich.

* 20“ grizzly planer moved to Lenox; 23” drum sander moved to Norwich.

• Any interested new members, see a Board Member to discuss the sign-up process.
• One On One Introductions of Members to Guests
• Begin Tour

• Jeff M made cool rack for the ceramics area
• Mark R made coasters on 3D printer
• Mike T worked on the HAM radio antenna
• Karen P repaired Lincoln's Levi jacket
• Carl S has bowls from last week's glaze firing

• 18 guests
• Tim C, Jeff M, and Carl S gave the tours
• 10 new members signed up by Dan J, Carl S and Bill R

• Company donated machinable plastic. Jake and Tom G picked it up
• Marcus S built a new tool rest for the lathe at Lenox
• Bill built a rack for the MIG and TIG welder
• Tom G and Dan J fixed the Miller 211 welder
• Dan J for making shelves for Hapto
• Charlie brought in a bunch of plants
• Jeff M for hosting the Zelda party on Friday