equipment:tormach770

This is an old revision of the document!

Tormach 770 CNC Mill

Make/Model

Tormach
Model# 770

Specs

Spindle Motor: 1HP
Spindle Speed: 175-3250 RPM (Low), 525-10020 RPM (High)
Feed Rate : 135 IPM (X,Y), 110 IPM (Z)
Travel : 14.0“ (X), 7.5” (Y), 13.25“ (Z)
Table Size : 26” x 8“
Error : <.0006”/ft.
Manual

Current Status

Operational

Location

Metal Shop

Owned by

Milwaukee Makerspace

History

Purchased from donations 2016

Notes

Training required. - Talk to Larry Andersen
Do NOT machine wood!
Plastic is allowed.
Its a good idea to check if the vise is square before use.
Shown below is the part you'll be trained to make via conversational programming

Training Documents

Operating Notes tormach_notes.doc
Milling Speeds and Feeds end_mill_speeds_and_feeds.doc
Drilling Speeds and Feeds drilling_feeds_and_speed.doc

QR Code

barcode Don't have barcode reader? Click here.

Software

Fusion 360 Post-Processor - Look for “Fusion 360 Post Processor for Tormach PCNC Mills with PathPilot” and get the most recent file.

equipment/tormach770.1523549909.txt.gz · Last modified: 2018/04/12 16:18 by landerson