Action disabled: source

equipment:stratasysfdm1600

Stratasys FDM 1600

Make/Model

Stratasys FDM 1600 3D printer with ABS head
1.75mm filament
ABS or ABS+ plastic resin material (use _only_ Stratasys OEM filament or equivalent such as Coex MG94 - ask Have Blue if unsure about material suitability)
Currently located in the 3D Printing Area

Documentation

Official Milwaukee MakerSpace Checkout Training Document

Software

See Have Blue for Insight 8.1 (Stratasys control software, last version to support the FDM series)

Current Status

June 2017: Functional… Last print had an under extrusion problem after 10 layers. Hotend was disassembled cleaned and reassembled. Further testing needed.

On loan from

Have Blue

History

SEP2014 - Arrived at Makerspace after Maker Faire

Notes

You need to be checked out on the Stratasys before you use it! There are melty bits and motors that can crush things. And it's hot.

equipment/stratasysfdm1600.txt · Last modified: 2017/06/22 01:22 by mmelk