• Solidoodle 3 3D Printer

• http://support.solidoodle.com/hc/en-us/articles/202884240-Start-Here-3rd-4th-Generation-
• http://support.solidoodle.com/hc/en-us/articles/201293294-Leveling-the-Print-Bed
• http://support.solidoodle.com/hc/en-us/sections/200310194-Hardware-Issues-Legacy-Models-
• Solidoodle Tech Support

• Print Envelope: 200mm x 200mm x 200mm (8“ x 8” x 8“)
• ABS Extruder Temperature: 200˚
• ABS Bed Temperature: Normally, ABS requires 105C, however, our Solidoodle temperature indicator is off by about +15C. There is a temperature chart taped to the side cover of the printer. Use it!

Repetier Host is used to control the printer.

• Repetier Host

Note: There is talk of switching to Printrun. — Pete Prodoehl 2014/04/10 21:55

• Slic3r

Slic3r is used to generate G-code from your STL files. Slic3r can be run from within Repetier Host, or you can slice your files separately and load the G-code into Repetier Host.

Note that we've had a few issues with the settings taking effect when slicing within Repetier Host, so if things don't seem to be working, try slicing outside Repetier Host.

• December 2015: Having problems with over-temperature error messages when trying to print with ABS.
  1. Note: The extruder reads 25c-30c cooler than it actually is. If you want to print at 230c (for abs) you should set the hot end to 200c.

• June 2017: Out of commission for an extended period. Taken out of operation due to mechanical glitch which caused defects in every print.
• June 2017: E3D V6 hotend and Titan extruder transfered to TAZ for upgrades.

• 3D Printing Lab

• Ed C.
• Joseph B.
• Pete P.
• the_digital_dentist 262-321-8264
• Skittles (Lucy Sinogeikina)

If you would like to get checked off to use this machine please contact one of the above listed trainers.

• Wade Starck
• Ken Becker (15-Apr-14)
• Emily Mondloch
• Mykal Antczak
• Kaysy
• Steve Shapiro
• Sean Woodman
• Matt Schedler
• Luke Schedler
• Bret Daniel
• Brad Felber

• 2014-02-25 - Arrived at Makerspace
  

• …

• $70 - Joe B.
• $100 - Lance L.
• $20 - Pete P.
• $100 - Vishal R.
• $20 - Harvey M.
• $50 - Ken B.
• $200 - Jim K.
• $200 - Ed K.
• $20 - Chris H.
• $50 - Adrian
• $20 - Steve P.
• $100 - Tony W.

TOTAL PLEDGED: $950