User Tools

Site Tools


equipment:silkscreeningrig

This is an old revision of the document!


Silk Screen Printing Rig

Make/Model

  • Richardson Industries, Westerville, OH
  • Includes Model #445 Hot Shot Heater

Specs

  • 4 screen holders on rotary wheel
  • 120v/1ph/60Hz, 20 amp heater

Current Status

Needs New Platen, Will be built in the woodshop. Screens, Squeegees, Scoop Coaters and Inks all ready to go!

Location

East Room, Lenox

On Lend From

History

2010/05/01 - Arrived at Makerspace
2012/12/31 - Moved to Lenox
2017/07/23 - Replaced damaged wire nuts and power cord

Approved Trainers

Approved Members

  • Bret
  • Brent
  • Andrea A.
  • Asim
  • Rik
  • Melissa
  • Kathy C.
  • Dillan
  • Jason Moore
  • Dan Kirchen
  • John Olson
  • Adrian
  • Faith H.

Notes

  • Mariah Rayne has been appointed Area Champion for the screen printing area. If you have questions, please ask them.
  • Hal Crossno is the Area Co-Champion.
  • Tom Gondek is an expert user and owns the machine.
  • Pete Prodoehl has used it quite a bit as well.
  • If you're not an expert, please use only water-based inks, not the Plastisol inks!
  • There are a number of consumables such as ink, tape, and transfer paper. Please make sure you replenish what you use/donate to the area and appropriate amount for the space to replenish it with area funds.
  • Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.
  • Make sure you turn the heater off (and unplug it) when you are done!
equipment/silkscreeningrig.1660503896.txt.gz · Last modified: 2022/08/14 19:04 by wildapricot-moses_mariah