Milwaukee Makerspace Wiki

User Tools

Site Tools

You are here: start » equipment » silkscreeningrig
equipment:silkscreeningrig

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
equipment:silkscreeningrig [2015/12/23 16:04]
raster 		equipment:silkscreeningrig [2024/04/03 02:44] (current)
wildapricot-landrum_geoff
Line 12: Line 12:
  
 =====Current Status ===== =====Current Status =====
-OK+Needs New Platen, Will be built in the woodshop. Screens, Squeegees, Scoop Coaters and Inks all ready to go!
  
 =====Location ===== =====Location =====
-East Room, Lenox+East Side of Vault Hall, Lenox
  
-=====On lend from =====+=====On Lend From =====
 [[members:tomgondek|Tom Gondek]] [[members:tomgondek|Tom Gondek]]
  
 =====History ===== =====History =====
-2010/05/01 - Arrived at Makerspace\\ +05/01/2010 - Arrived at Makerspace\\ 
-2012/12/31 - Moved to Lenox\\+12/31/2012 - Moved to Lenox\\ 
 +07/23/2017 - Replaced damaged wire nuts and power cord\\ 
 +01/01/2022 - Moved to Vault Hall\\
  
  
-===== Approved Trainers ===== 
-  * [[members:peteprodoehl|Pete]] 
  
 +===== Approved Trainers =====
 +  * Champion: 
 +  * Co-Champion: 
 ===== Approved Members ===== ===== Approved Members =====
-  * Bret + 
-  * Brent +
-  * Andrea A. +
-  * Asim +
-  * Rik +
-  * Melissa +
-  * Kathy C. +
-  * Dillan+
  
  
 =====Notes =====  =====Notes ===== 
-  * [[members:peteprodoehl|Pete Prodoehl]] has been appointed Area Champion for the screen printing area. If you have questions, please ask him. +  * [[members:tomgondek|Tom Gondek]] is an expert user and owns the machine.
-  * [[members:tomgondek|Tom Gondek]] is an expert user, in fact, he owns the machine. :)\\+
   * If you're not an expert, please use only water-based inks, not the Plastisol inks!   * If you're not an expert, please use only water-based inks, not the Plastisol inks!
-  * There are a number of consumables such as ink, tape, spray glue, and possibly vinyl and transfer paper. Please make sure you replenish what you use.+  * There are a number of consumables such as ink, tape, and transfer paper. Please make sure you replenish what you use/donate to the area and appropriate amount for the space to replenish it with area funds.
   * Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.   * Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.
-  * If you are using vinyl (or another temporary masking/template solution) and water-based inks, feel free to use any of the blank screens kept in the screen printing area. 
   * Make sure you turn the heater off (and unplug it) when you are done!   * Make sure you turn the heater off (and unplug it) when you are done!
  
  
  
equipment/silkscreeningrig.1450886686.txt.gz · Last modified: 2015/12/23 16:04 by raster

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki