• Richardson Industries, Westerville, OH
• Includes Model #445 Hot Shot Heater

• 4 screen holders on rotary wheel
• 120v/1ph/60Hz, 20 amp heater

Needs New Platen, Will be built in the woodshop. Screens, Squeegees, Scoop Coaters and Inks all ready to go!

East Side of Vault Hall, Lenox

Tom Gondek

05/01/2010 - Arrived at Makerspace
12/31/2012 - Moved to Lenox
07/23/2017 - Replaced damaged wire nuts and power cord
01/01/2022 - Moved to Vault Hall

• Champion:
• Co-Champion:

• Tom Gondek is an expert user and owns the machine.
• If you're not an expert, please use only water-based inks, not the Plastisol inks!
• There are a number of consumables such as ink, tape, and transfer paper. Please make sure you replenish what you use/donate to the area and appropriate amount for the space to replenish it with area funds.
• Clean up! Screen printing is messy, especially for beginners. Make sure you clean the squeegees and screens and the machine itself. Don't leave a mess for the next person.
• Make sure you turn the heater off (and unplug it) when you are done!