This is an old revision of the document!
Silhouette Cameo
Make/Model
Approved Trainers
Trained Members
Trained | Trained By | Date |
BenN | Pete | 21-DEC-2013 |
JimK | Pete | 21-DEC-2013 |
AudreyH | Pete | 21-DEC-2013 |
Chris H. | ? | ? |
HarveyM | Lexie | 5/6/2014 |
Kaysy | Pete | 5/31/2014 |
Mykal | Pete | 5/31/2014 |
FelishaW | Lexie | 8/26/2014 |
ShaneT | Brant | 9/7/2014 |
AndyK | Pete | 9/12/2014 |
TeresaC | Lexie | 10/24/2014 |
Kendra | Brant | 11/28/2014 |
KeithM | Brant | 11/28/2014 |
LindaSz | Brant | 11/28/2014 |
Issac | Brant | 11/28/2014 |
SteveB | Brant | 11/28/2014 |
BradF | Lexie | 12/13/2014 |
SamL | Lexie | 12/13/2014 |
EllenF | Lexie | 12/13/2014 |
Bill*2 | Lexie | 28-FEB-2015 |
Scott S. | Lexie | 28-FEB-2015 |
Rick S. | Lexie | 28-FEB-2015 |
Kendra M. | Lexie | 28-FEB-2015 |
Linda S | Lexie | 6-MAR-2016 |
Amy Stanley | Lexie | 6-Mar-2016 |
Sean Evan | Lexie | 6-MAR-2016 |
Faith Herrara | Pete | 16-MAR-2016 |
Barbara J Rehm | Lexie | 22-MAR-2016 |
John Bacik | Lexie | 22-MAR-2016 |
Steffanie Maher | Lexie | 22-MAR-2016 |
DL Swanson | Lexie | 22-MAR-2016 |
Jason Moore | Lexie | 22-MAR-2016 |
Ryan Miller | Lexie | 22-MAR-2016 |
Minoca Thomas | Lexie | 22-MAR-2016 |
John Olson | Lexie | 22-MAR-2016 |
Amy Haffner | Lexie | 22-MAR-2016 |
Bill Coon | Lexie | 22-MAR-2016 |
Todd Gnacinski | Lexie | 22-MAR-2016 |
John Nelson | Lexie | 17-MAY-2016 |
Tim Kern | Lexie | 17-MAY-2016 |
David Arnold | Lexie | 17-MAY-2016 |
Dave Bateman | Lexie | 17-MAY-2016 |
Dale Noll | Lexie | 17-MAY-2016 |
Jonathan Lin | Lexie | 17-MAY-2016 |
Dmitry Krivochenister | Lexie | 12-July-2016 |
Anastasia Kraft | Lexie | 12-July-2016 |
Accessories/Consumables
These are the extras that were ordered with the additional funds raised.
(1) Silhouette Cameo 12-Inch By 24-Inch Cutting Mat
(1) Silhouette Cameo Replacement Cutting Mat
(2) Silhouette Replacement Blades
(1) Silhouette Fabric Blade
(1) Silhouette Sewable Fabric Interfacing
(1) Silhouette Clean Cut Fabric Interfacing
(3) Silhouette Premium Transfer Paper
(3) Silhouette 12-Inch Premium Vinyl, Black
(1) Silhouette 12-Inch Premium Vinyl, Dark Red
(1) Silhouette 12-Inch Premium Vinyl, Leaf Green
(1) Silhouette 12-Inch Premium Vinyl, Navy
(2) Silhouette Premium Indoor/Outdoor Vinyl, White
(1) Silhouette Premium Indoor/Outdoor Vinyl, Orange
(1) Silhouette Adhesive Vinyl, 9-Inch, Brown
(1) Silhouette Adhesive Vinyl, 12-Inch, Yellow
Documentation
Software
Machine Status
Supplies Status
Color | Finish | Width (inches) | On hand |
Contact paper | n/a | 12“ | A little |
Contact paper | n/a | Scraps | Not much |
Transfer tape | n/a | 6.5” | 1 roll |
White | Matte | 9“ | 1 roll |
White | Matte | 12” | 2 rolls |
White | Gloss | 9“ | 2 rolls |
Black | Matte | 12” | 1 roll |
Black | Gloss | Any | None |
Red | Matte | Any | Nope |
Red | Gloss | 15“ | 2 rolls |
Orange | Matte | 9” | 1 roll |
Orange | Gloss | 15“ | 1 roll |
Navy Blue | Matte | 9” | 1 roll |
Navy Blue | Matte | 12“ | 1 roll |
Navy Blue | Matte | 15” | 1 roll |
Navy Blue | Gloss | Any | None |
Brown | Matte | 9“ | 1 roll |
Brown | Gloss | Any | None |
Gold | Matte | 15” | 1 roll |
Gold | Gloss | Any | None |
Silver | Matte | Any | None |
Silver | Gloss | Any | None |
Dark Green | Matte | Any | None |
Dark Green | Gloss | Any | None |
Lime Green | Matte | Any | Scraps |
Lime Green | Gloss | Any | Nope |
Order supplies from:
Previous orders:
Location
Paid for by
$175 - Pete (towards cutter and consumables) - PAID
$50 - Pete (towards consumables) - PAID
$25 - Bob T. (towards cutter) - PAID
$20 - Lance (towards cutter) - PAID
$20 - Dan J. (towards cutter) - PAID
$50 - Brant (towards cutter and consumables)
$50 - T3 (towards cutter and consumables) - PAID
$20 - Joe B. (towards consumables) - PAID
$20 - Vishal (towards consumables) - PAID
$20 - Tom Gr. (towards consumables)
$20 - Royce (towards consumables) - PAID
$20 - Buggs (towards consumables) - PAID
$20 - Aaron K. (towards consumables) - PAID
$?? - jason g. (towards consumables)
$10 - Robert M. (towards consumables)
$?? - Adam C. (towards consumables)
$20 - Bret D. (towards consumables) - PAID
$20 - Audrey (towards consumables) - PAID
$20 - Kathy (towards consumables) - PAID
$20 - Jim K. (towards consumables)
TOTAL PLEDGED: $600
TOTAL COLLECTED: $500
TOTAL SPENT SO FAR: $495
(Extra over the needed $250 $230 will be used for consumables and spare parts.)
History
Notes
The Silhouette can cut paper and vinyl, and with a special blade, fabric. (
More info.)
The cutting mats are sticky so the material you are cutting will adhere to it. If they lose their stickiness, just wash with dish soap and allow to air dry.
You can use the Silhouette Studio software (Mac
OS X & Windows) to design things, but it can also import DXF files, which you can export from Inkscape, Adobe Illustrator, or CorelDraw.
* Silhouette Studio 3.0 does not work with Windows XP - Vista or higher.
You can cut things via a computer and USB cable if you use Silhouette Studio, or via an SD card with your files on it. (The SD card is a little bit more tricky.)
Remember that if you are cutting vinyl to use for screen printing (involving sticking the vinyl on the bottom of the screen) you need to reverse your image! Use the 'Flip Horizontally' command under the 'Object → Transform' menu (or the 'Object–>Mirror' menu).
Blog Posts
Here's a few posts showing what you can do with the Silhouette.
Don't have barcode reader? Click here.