User Tools

Site Tools


equipment:silhouettecameo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
equipment:silhouettecameo [2015/12/23 16:03]
raster [Blog Posts]
equipment:silhouettecameo [2024/02/25 14:16] (current)
wildapricot-van_groll_casey [Table]
Line 1: Line 1:
 ====== Silhouette Cameo ====== ====== Silhouette Cameo ======
-~~NOTOC~~+ 
 +Note: As of 2017-06-03 we've upgraded to the Silhouette Cameo 3. (Not all info below has been updated.) 
 + 
 {{ :equipment:silhouette.jpg?300|}} {{ :equipment:silhouette.jpg?300|}}
  
 ===== Make/Model ===== ===== Make/Model =====
-  * Silhouette Cameo+  * Silhouette Cameo 3
  
 ===== Approved Trainers ===== ===== Approved Trainers =====
-  * [[members:peteprodoehl|Pete Prodoehl (raster)]] 
   * [[members:alexian|Lexie]]   * [[members:alexian|Lexie]]
-  * [[members:brantholeman:|BrantH]]  +  * [[members:hapto|Hapto]] 
 +  * [[members:Yvonne|Yvonne]] 
 +  * [[members:caseyvangroll|Casey Van Groll]] 
 + 
 + 
 +Demonstration Video: https://youtu.be/cObTif5eNhQ 
 + 
 +How to stick vinyl using transfer tape;  
 +https://youtu.be/9Lpq0YQHqX8
  
  
 ===== Trained Members ===== ===== Trained Members =====
  
-^ Trained                      ^ Trained By  ^ Date         +^ Trained                ^ Trained By  ^ Date          
-| BenN                         | Pete        | 21-DEC-2013  +| BenN                   | Pete        | 21-DEC-2013   
-| JimK                         | Pete        | 21-DEC-2013  +| JimK                   | Pete        | 21-DEC-2013   
-| AudreyH                      | Pete        | 21-DEC-2013  | +| AudreyH                | Pete        | 21-DEC-2013   
-| [[members:chrish|Chris H.]]  | ?           | ?            +| HarveyM                | Lexie       | 5/6/2014      
-| HarveyM                      | Lexie       | 5/6/2014     +| Kaysy                  | Pete        | 5/31/2014     
-| Kaysy                        | Pete        | 5/31/2014    +| Mykal                  | Pete        | 5/31/2014     
-| Mykal                        | Pete        | 5/31/2014    +| FelishaW               | Lexie       | 8/26/2014     
-| FelishaW                     | Lexie       | 8/26/2014    +| ShaneT                 | Brant       | 9/7/2014      
-| ShaneT                       | Brant       | 9/7/2014     +| AndyK                  | Pete        | 9/12/2014     
-| AndyK                        | Pete        | 9/12/2014    +| TeresaC                | Lexie       | 10/24/2014    
-| TeresaC                      | Lexie       | 10/24/2014   +| Kendra                 | Brant       | 11/28/2014    
-| Kendra                       | Brant       | 11/28/2014   +| KeithM                 | Brant       | 11/28/2014    
-| KeithM                       | Brant       | 11/28/2014   +| LindaSz                | Brant       | 11/28/2014    
-| LindaSz                      | Brant       | 11/28/2014   +| Issac                  | Brant       | 11/28/2014    
-| Issac                        | Brant       | 11/28/2014   +| SteveB                 | Brant       | 11/28/2014    
-| SteveB                       | Brant       | 11/28/2014   +| BradF                  | Lexie       | 12/13/2014    
-| BradF                        | Lexie       | 12/13/2014   +| SamL                   | Lexie       | 12/13/2014    
-| SamL                         | Lexie       | 12/13/2014   +| EllenF                 | Lexie       | 12/13/2014    
-| EllenF                       | Lexie       | 12/13/2014   +| Bill*2                 ^ Lexie       | 28-FEB-2015   
-| Bill*2                       ^ Lexie       | 28-FEB-2015  +| Scott S.               | Lexie       | 28-FEB-2015   
-| Scott S.                     | Lexie       | 28-FEB-2015  +| Rick S.                | Lexie       | 28-FEB-2015   
-| Rick S.                      | Lexie       | 28-FEB-2015  +| Kendra M.              | Lexie       | 28-FEB-2015   | 
-| Kendra M.                    | Lexie       | 28-FEB-2015  |+| Linda S                | Lexie       | 6-MAR-2016    | 
 +| Amy Stanley            | Lexie       | 6-Mar-2016    | 
 +| Sean Evan              | Lexie       | 6-MAR-2016    | 
 +| Faith Herrara          | Pete        | 16-MAR-2016   | 
 +| Barbara J Rehm         | Lexie       | 22-MAR-2016   | 
 +| John Bacik             | Lexie       | 22-MAR-2016   | 
 +| Steffanie Maher        | Lexie       | 22-MAR-2016   | 
 +| DL Swanson             | Lexie       | 22-MAR-2016   | 
 +| Jason Moore            | Lexie       | 22-MAR-2016   | 
 +| Ryan Miller            | Lexie       | 22-MAR-2016   | 
 +| Minoca Thomas          | Lexie       | 22-MAR-2016   | 
 +| John Olson             | Lexie       | 22-MAR-2016   | 
 +| Amy Haffner            | Lexie       | 22-MAR-2016   | 
 +| Bill Coon              | Lexie       | 22-MAR-2016   | 
 +| Todd Gnacinski         | Lexie       | 22-MAR-2016   | 
 +| John Nelson            | Lexie       | 17-MAY-2016   | 
 +| Tim Kern               | Lexie       | 17-MAY-2016   | 
 +| David Arnold           | Lexie       | 17-MAY-2016   | 
 +| Dave Bateman           | Lexie       | 17-MAY-2016   | 
 +| Dale Noll              | Lexie       | 17-MAY-2016   | 
 +| Jonathan Lin           | Lexie       | 17-MAY-2016   | 
 +| Dmitry Krivochenister  Lexie       | 12-July-2016 
 +| Anastasia Kraft        | Lexie       | 12-July-2016 
 +| Rainer Wolter          | Pete        | 16-JAN-2018   | 
 +| Joe Baker              | Pete        | 16-JAN-2018   | 
 +| Billy King-Dee         | Pete        | 16-JAN-2018   | 
 +| Tyler Phillips         | Pete        | 16-JAN-2018   | 
 +| Joshua Rolefson        | Pete        | 16-JAN-2018   | 
 +| Amber Jackson          | Pete        | 16-JAN-2018   | 
 +| Maksym Pryhodko        | Pete        | 16-JAN-2018   | 
 +| Mary S.                | Brant       | 27-APR-2018   | 
 +| Lyra C.                | Brant       | 27-APR-2018   | 
 +| Dan B.                 | Brant       | 27-APR-2018   | 
 +| Casey Van Groll        | Hapto       | 30-JAN-2024   | 
 +| Arushi Gupta           | Casey       | 24-FEB-2024   | 
 + 
 + 
 +===== Usage ===== 
 + 
 +  * Member should (at a minimum) bring their own vinyl. There may be small scraps to use, but bring your own rolls or sheets. 
 +  * Members doing a lot of cutting may want to own their own blade and possibly their own cutting mat.
  
  
 ===== Accessories/Consumables ===== ===== Accessories/Consumables =====
  
-These are the extras that were ordered with the additional funds raised.+These are the consumable that should be ordered occasionally.
  
-  * (1) Silhouette Cameo 12-Inch By 24-Inch Cutting Mat +  * Silhouette Cameo 12-Inch By 24-Inch Cutting Mat 
-  * (1) Silhouette Cameo Replacement Cutting Mat +  * Silhouette Cameo Replacement Cutting Mat 
-  * (2) Silhouette Replacement Blades +  * Silhouette Replacement Blades
-  * (1) Silhouette Fabric Blade +
-  * (1) Silhouette Sewable Fabric Interfacing +
-  * (1) Silhouette Clean Cut Fabric Interfacing +
-  * (3) Silhouette Premium Transfer Paper +
-  * (3) Silhouette 12-Inch Premium Vinyl, Black +
-  * (1) Silhouette 12-Inch Premium Vinyl, Dark Red +
-  * (1) Silhouette 12-Inch Premium Vinyl, Leaf Green +
-  * (1) Silhouette 12-Inch Premium Vinyl, Navy +
-  * (2) Silhouette Premium Indoor/Outdoor Vinyl, White +
-  * (1) Silhouette Premium Indoor/Outdoor Vinyl, Orange +
-  * (1) Silhouette Adhesive Vinyl, 9-Inch, Brown +
-  * (1) Silhouette Adhesive Vinyl, 12-Inch, Yellow+
  
  
 ===== Documentation ===== ===== Documentation =====
-  * [[http://www.silhouetteamerica.com/media/docs/technical-specs_cameo.pdf|Silhouette Cameo Specs]] +  * [[https://www.silhcdn.com/m/d/user-guides/cameo-3-en.pdf|Silhouette Cameo 3 User Guide (PDF)]] 
-  * [[http://www.silhouetteamerica.com/media/docs/manual_silhouette-studio_v5.pdf|Silhouette Studio Manual (PDF)]]+  * [[https://cdn.silhouetteamerica.com/m/d/manual_silhouette-studio_v5.pdf|Silhouette Studio Manual (PDF)]]
   * [[http://www.youtube.com/user/SilhouetteAmericaInc/videos|Silhouette YouTube Channel (Video)]]   * [[http://www.youtube.com/user/SilhouetteAmericaInc/videos|Silhouette YouTube Channel (Video)]]
  
Line 75: Line 113:
 ===== Supplies Status ===== ===== Supplies Status =====
 ^ Color          ^ Finish  ^ Width (inches)  ^ On hand   ^ ^ Color          ^ Finish  ^ Width (inches)  ^ On hand   ^
-| Contact paper  | n/a     | 12"             Nope      |+| Contact paper  | n/a     | 12"             A little  |
 | Contact paper  | n/a     | Scraps          | Not much  | | Contact paper  | n/a     | Scraps          | Not much  |
 +| Transfer tape  | n/a     | 6.5"            | 1 roll    |
 | White          | Matte   | 9"              | 1 roll    | | White          | Matte   | 9"              | 1 roll    |
 | White          | Matte   | 12"             | 2 rolls   | | White          | Matte   | 12"             | 2 rolls   |
Line 111: Line 150:
   * Craft Lab   * Craft Lab
  
-===== Paid for by ===== +===== Owner ===== 
-  * $175 - Pete (towards cutter and consumables) - PAID +  * Lexie
-  * $50 - Pete (towards consumables) - PAID +
-  * $25 - Bob T. (towards cutter) - PAID +
-  * $20 - Lance (towards cutter) - PAID +
-  * $20 - Dan J. (towards cutter) - PAID +
-  * $50 - Brant (towards cutter and consumables) +
-  * $50 - T3 (towards cutter and consumables) - PAID +
-  * $20 - Joe B. (towards consumables) - PAID +
-  * $20 - Vishal (towards consumables) - PAID +
-  * $20 - Tom Gr. (towards consumables) +
-  * $20 - Royce (towards consumables) - PAID +
-  * $20 - Buggs (towards consumables) - PAID +
-  * $20 - Aaron K. (towards consumables) - PAID +
-  * $?? - jason g. (towards consumables) +
-  * $10 - Robert M. (towards consumables) +
-  * $?? - Adam C. (towards consumables) +
-  * $20 - Bret D. (towards consumables) - PAID +
-  * $20 - Audrey (towards consumables) - PAID +
-  * $20 - Kathy (towards consumables) - PAID +
-  * $20 - Jim K. (towards consumables) +
- +
-**TOTAL PLEDGED: $600**+
  
-**TOTAL COLLECTED: $500** 
  
-**TOTAL SPENT SO FAR: $495** 
  
 (Extra over the needed <del>$250</del> $230 will be used for consumables and spare parts.) (Extra over the needed <del>$250</del> $230 will be used for consumables and spare parts.)
  
 ===== History ===== ===== History =====
-  * 2013-12-18 Ordered\\ +  * 2017-06-03 Silhouette 3 Arrived at Makerspace to replace Silhouette 2 
-  * 2013-12-21 - Arrived at Makerspace\\+  * 2013-12-21 - Silhouette 2 Arrived at Makerspace
  
 ===== Notes =====  ===== Notes ===== 
Line 151: Line 167:
   *   * Silhouette Studio 3.0 does not work with Windows XP - Vista or higher.   *   * Silhouette Studio 3.0 does not work with Windows XP - Vista or higher.
   * You can cut things via a computer and USB cable if you use Silhouette Studio, or via an SD card with your files on it. (The SD card is a little bit more tricky.)   * You can cut things via a computer and USB cable if you use Silhouette Studio, or via an SD card with your files on it. (The SD card is a little bit more tricky.)
-  * Remember that if you are cutting vinyl to use for screen printing (involving sticking the vinyl on the //bottom// of the screen) you need to reverse your image! Use the 'Flip Horizontally' command under the 'Object -> Transform' menu.+  * Remember that if you are cutting vinyl to use for screen printing (involving sticking the vinyl on the //bottom// of the screen) you need to reverse your image! Use the 'Flip Horizontally' command under the 'Object -> Transform' menu (or the 'Object-->Mirror' menu).
  
 ===== Blog Posts =====  ===== Blog Posts ===== 
Line 165: Line 181:
   * [[http://blog.inventables.com/2013/10/easy-papercraft-with-silhouette-cameo.html|Easy Papercraft with the Silhouette Cameo]]   * [[http://blog.inventables.com/2013/10/easy-papercraft-with-silhouette-cameo.html|Easy Papercraft with the Silhouette Cameo]]
   * [[https://www.inventables.com/projects/grinch-laptop-sticker|Grinch Laptop Sticker]]   * [[https://www.inventables.com/projects/grinch-laptop-sticker|Grinch Laptop Sticker]]
 +  * [[http://rasterweb.net/raster/2015/05/30/furiosas-skeleton-arm/|Imperator Furiosa’s Skeleton Arm]]
 +  * [[http://rasterweb.net/raster/2015/10/07/the-detonator/|The Detonator]]
   * [[http://rasterweb.net/raster/2015/12/23/screen-printing-demo/|Screen Printing Demo]]   * [[http://rasterweb.net/raster/2015/12/23/screen-printing-demo/|Screen Printing Demo]]
 +  * [[http://rasterweb.net/raster/2016/02/28/the-screwdriver/|The Screwdriver]]
 +  * [[http://rasterweb.net/raster/2013/12/31/dont-be-a-dick/|Don’t be a Dick!]]
  
 ~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/silhouettecameo~size=S~~ ~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/silhouettecameo~size=S~~
  
equipment/silhouettecameo.1450886583.txt.gz · Last modified: 2015/12/23 16:03 by raster