User Tools

Site Tools


equipment:makerbotcupcake

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
equipment:makerbotcupcake [2011/11/05 14:45]
branth
equipment:makerbotcupcake [2012/06/01 20:45] (current)
raster [History]
Line 1: Line 1:
-====== MakerBot Cupcake CNC ======+====== MakerBot CupCake CNC ======
 ~~NOTOC~~ ~~NOTOC~~
 {{ :equipment:makerbot_cupcake_3d_printer.jpg?300|}} {{ :equipment:makerbot_cupcake_3d_printer.jpg?300|}}
-The MakerBot Cupcake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/folders should be stored on the SD card in the MakerBot, which you can copy to your own machine.)+ ===== Make/Model =====  
 +MakerBot CupCake CNC
  
-The Cupcake has the DC motor extruder, not the stepper motor extruder.\\+===== Specs  =====  
 +Working area 100 x 100 mm\\ 
 +Heated Build Platform\\ 
 +DC Motor Extruder\\ 
 +3mm Filament
  
-We print with 3mm ABS filamentDon't attempt to print with PLA unless you ask Drew Dominguez firstDon't try to print with 1.75mm filament, as that won't work. \\+See Also: http://wiki.makerbot.com/cupcake
  
-Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.)+===== Current Status =====  
 +As of May 2012: not at the space\\ 
 + 
 +===== Location =====  
 +As of May 2012: not at the space\\ 
 + 
 +===== On lend from =====  
 +[[members:DrewDominguez|Drew Dominguez]] 
 + 
 +===== History =====  
 +2011-08-01 - Arrived at Makerspace\\ 
 +2012-05-28 - Not at the Makerspace 
 + 
 +===== Notes =====  
 +The MakerBot CupCake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/folders should be stored on the SD card in the MakerBot, which you can copy to your own machine.) 
 + 
 +We print with 3mm ABS filament. Don't attempt to print with PLA unless you ask [[members:DrewDominguez|Drew Dominguez]] first. Don't try to print with 1.75mm filament, as that won't work.\\ 
 + 
 +Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.)\\
  
 Temperature for the extruder: 210 deg F \\ Temperature for the extruder: 210 deg F \\
 Temperature for the HBP: 110 (YMMV)\\ Temperature for the HBP: 110 (YMMV)\\
  
-Resident Experts: Drew Dominguez and Pete Prodoehl\\ +Need to bond two pieces of ABS together? https://groups.google.com/forum/#!topic/makerbot/H_S2YDH_kwI/discussion 
-Up-And-Coming Expert: Matt Neesley+ 
 +===== Resident Experts ===== 
 +[[members:DrewDominguez|Drew Dominguez]]\\ 
 +Adam C.\\ 
 +[[members:PeteProdoehl|Pete Prodoehl]] \\ 
 + 
 +===== Up-And-Coming Expert ===== 
 +[[members:MattNeesley|Matt Neesley]]  
 + 
 +===== QR Code ===== 
 + 
 +~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/makerbotcupcake~size=M~~ 
equipment/makerbotcupcake.1320504347.txt.gz · Last modified: 2011/11/05 14:45 by branth