Differences

This shows you the differences between two versions of the page.

--- equipment:makerbotcupcake [2011/11/05 14:43]
branth
+++ equipment:makerbotcupcake [2012/06/01 20:45] (current)
raster [History]
@@ Line 1: / Line 1: @@
-====== MakerBot Cupcake CNC ======
+====== MakerBot CupCake CNC ======
 ~~NOTOC~~
 {{ :equipment:makerbot_cupcake_3d_printer.jpg?300|}}
-The MakerBot Cupcake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/folders should be stored on the SD card in the MakerBot, which you can copy to your own machine.)
+ ===== Make/Model =====
+MakerBot CupCake CNC
-The Cupcake has the DC motor extruder, not the stepper motor extruder.
+===== Specs  =====
+Working area 100 x 100 mm\\
+Heated Build Platform\\
+DC Motor Extruder\\
+mm Filament
-We print with 3mm ABS filament. Don't attempt to print with PLA unless you ask Drew Dominguez first. Don't try to print with 1.75mm filament, as that won't work.
+See Also: http://wiki.makerbot.com/cupcake
-Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.)
+===== Current Status =====
+As of May 2012: not at the space\\
-Temperature for the extruder: 210 / Temperature for the HBP: 110 (YMMV)
+===== Location =====
+As of May 2012: not at the space\\
+===== On lend from =====
+[[members:DrewDominguez|Drew Dominguez]]
+===== History =====
+-08-01 - Arrived at Makerspace\\
+-05-28 - Not at the Makerspace
+===== Notes =====
+The MakerBot CupCake is located in the Lab. You can use the PC that is on the table to control it, or install ReplicatorG on your own computer. (The profile files/folders should be stored on the SD card in the MakerBot, which you can copy to your own machine.)
+We print with 3mm ABS filament. Don't attempt to print with PLA unless you ask [[members:DrewDominguez|Drew Dominguez]] first. Don't try to print with 1.75mm filament, as that won't work.\\
+Kapton tape on the Heated Built Platform seems to work better than blue painters tape. (There should be a roll floating around the Lab if you need to replace it.)\\
+Temperature for the extruder: 210 deg F \\
+Temperature for the HBP: 110 (YMMV)\\
+Need to bond two pieces of ABS together? https://groups.google.com/forum/#!topic/makerbot/H_S2YDH_kwI/discussion
+===== Resident Experts =====
+[[members:DrewDominguez|Drew Dominguez]]\\
+Adam C.\\
+[[members:PeteProdoehl|Pete Prodoehl]] \\
+===== Up-And-Coming Expert =====
+[[members:MattNeesley|Matt Neesley]]
+===== QR Code =====
+~~BARCODE~class=barcode_right~url=http://wiki.milwaukeemakerspace.org/equipment/makerbotcupcake~size=M~~
-Resident Expert: Drew Dominguez

Milwaukee Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools