User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
areas:welding [2017/01/20 18:56]
areas:welding [2020/03/30 20:21] (current)
wildapricot-lewis_peter [Authorized / Signed Off Users]
Line 2: Line 2:
 ===== Trainers ===== ===== Trainers =====
 +Jake Bissen Trains on all equipment. Specifically training on oxy/​acetylene torch and belt sander.
 +Peter Lewis trains on the Hobart Mig, Snap-on Aluminum Mig, Everlast Tig, esab plasma cutter.
 ===== Rules and Etiquette ===== ===== Rules and Etiquette =====
 +Be Excellent to each other.  ​
 +Cleanup after yourself. ​
 +Make sure ALL gas valves and equipment are turned off when you are finished OR even if you are just passing through please check that they are closed/off.
 +Please clean up the work bench when you are finished, give it a quick grind to remove slag and use a bench brush to sweep grit, slag and dust INTO THE GARBAGE, not onto the floor. ​ Throw away damaged or used consumables.
 +Do NOT use an air gun to blow off work surfaces. Metal dust is not good for you to breath and the dust can get blown into the equipment and cause electrical failures. ​
 +Please keep plastic covers over equipment that is not being used. Uncover it while using it all of the equipment needs air flow through the case while in use. 
 ===== Authorized / Signed Off Users ===== ===== Authorized / Signed Off Users =====
 [[areas/​welding/​approvedusers|Approved Users List]] [[areas/​welding/​approvedusers|Approved Users List]]
 +As of February 2020. If you have been trained in this area and do not see your name on this list contact Jake Bissen or Peter Lewis 
 +Hobart MIG:
 +Charlie Urbanek, Nick Bandarchi, Doug sykora, John Trunek, Fpunzio, Alan, Andy Amrhein, Kevin K, Tony, Bret Daniel, Kayla Turner, Crissy Harshman
 +Snap-On Mig:
 +Andy Amrhein, Kevin K, Tony, Bret Daniel
 +Stick Welders:
 +Tig Welders:
 ===== Machines ===== ===== Machines =====
-  * {{:​equipment:​welder04.jpg?​100|}}[[Equipment/​Welder4|Electric Arc Welder (Lincoln)]] +
-  * {{:​equipment:​welder01.jpg?​100|}}[[Equipment/​Welder6|TIG/​Arc Welder (Chicago Electric)]]+
   * {{:​equipment:​welder03a.jpg?​100|}}[[Equipment/​WelderHobart2|Arc Welder 1 (Hobart)]]   * {{:​equipment:​welder03a.jpg?​100|}}[[Equipment/​WelderHobart2|Arc Welder 1 (Hobart)]]
   * {{:​equipment:​welder05b.jpg?​100|}}[[Equipment/​WelderHobart3|Arc Welder 2 (Hobart)]]   * {{:​equipment:​welder05b.jpg?​100|}}[[Equipment/​WelderHobart3|Arc Welder 2 (Hobart)]]
Line 19: Line 43:
   * {{:​esab_pcm1125.jpg?​100|}}[[Equipment/​ESABPCM1125|ESAB PCM-1125 Plasma Cutter]]   * {{:​esab_pcm1125.jpg?​100|}}[[Equipment/​ESABPCM1125|ESAB PCM-1125 Plasma Cutter]]
   * {{:​equipment:​exhaustfan01.jpg?​100|}}[[Equipment/​ExhaustFan1|Welding Exhaust Fan]]   * {{:​equipment:​exhaustfan01.jpg?​100|}}[[Equipment/​ExhaustFan1|Welding Exhaust Fan]]
 +  * Snap-On MIG185i Synergic Mig Welder (currently offsite)
 +  * Everlast Powertig 250ex
 +  * Miller Econtig (Currently needs Maintenance)
 +  * Miller Synchrowave 250 DX (Currently needs Maintenance)
 ===== FAQs / Howtos / Materials settings ===== ===== FAQs / Howtos / Materials settings =====
 +We have no relationship with the following Youtubers But I do recommend their videos.
 +Jody @ weldingtipsandtricks
 +Justin @ The Fabrication Series
 +Tony @ This Old Tony
 +User Manuals:
 +Miller EconoTig ​
 +Miller Synchrowave 250 DX 
 +Everlast Powertig 250 EX https://​​sites/​everlastgenerators/​files/​downloads/​PowerTIG%20250EX%202014.pdf
 +Esab Plasma Cutter
areas/welding.1484938613.txt.gz · Last modified: 2017/01/20 18:56 by keithm