• Use parking passes to tag any projects you are leaving to dry
• Write notes on dry erase board at your discretion
• Turn on lights and fans when using the room
• Contact BrantH. if you have any questions

• Bench-top Spray Booth
• Parts Washer
• Paint Room Exhaust Fan
• H-95 Vacuum Pump/Aspirator
• August 2016 inventory of Paint Room

• In March of 2018 the vault next to the Paint Room (Vault #15) was vacant and an opportunity arose to double the size of the current space.
• A meeting was held on Wednesday, 4/25/18 to discuss proposals and ideas. 14 people attended:
  • Brant H.
  • Tim C.
  • Lyra C.
  • Tony S.
  • Kathy C.
  • Tony W.
  • Tom Grz.
  • Morgan K.W.
  • Jake B.
  • Hiram W.
  • Harvey M.
  • Steve P.
  • Kathy H.
  • Bill C.

Click here for a PDF

• Estimated total cost = $100
• Metal framing (approx. 87 lineal ft.)
  • (4) 10 ft. verticals = 40 ft.
  • (6) 5.4 ft. kickers = 32.3 ft.
  • (2) 6-7 ft. base/top plates = 14 ft.
  • Home Depot $3.59/8 ft. length
  • https://www.homedepot.com/p/ClarkDietrich-ProSTUD-25-3-5-8-in-x-8-ft-25-Gauge-EQ-Galvanized-Steel-Wall-Framing-Stud-360081015/100319022
  • Total likely $43 w/ tax
• Roll filter media (approx. 60 sq.ft.)
  • Grainger $18 w/o S&H
  • 20 ft. x 36“ MERV: Less Than 5
  • https://www.grainger.com/product/AIR-HANDLER-20-ft-x-36-Filter-Media-Roll-2W186
• (2) Wide flange steel channels
  • Harrison Metals gave Tom metal for free
  • MetalsDepot, 8” tall, 2.5“ wide 72” long, A-36 Steel Channel, $156 ea.

1. Date TBD - Provide proposal to Board for review
2. Date TBD - Obtain Board approval to proceed
3. Date TBD - Clear out Vault 15 and remove remaining wood shelf parts from wall
4. Date TBD - Relocate shelving and paints from Vault 16 to 15
5. Date TBD - Cut new air grille into Vault 15 door
6. Date TBD - Relocate air hose and regulator out from under wall fan in Vault 16
7. Date TBD - Remove existing filter and framing from sidewall fan in Vault 16
8. Date TBD - Build diagonal metal frame filter wall at sidewall fan in Vault 16
9. Date TBD - Install blanking panel(s) or baffles at fan
10. Date TBD - Cover filter wall with wire mesh and roll filter mesh
11. Date TBD - Saw cut opening in wall between vaults
12. Date TBD - Install temporary jack posts for spancrete ceilings?
13. Date TBD - Demolish 1/2 depth portion above opening for new lintel/steel channels
14. Date TBD - Install first lintel/steel channel
15. Date TBD - Demolish remaining 1/2 depth portion on other side of wall
16. Date TBD - Install second lintel/steel channel and secure channels together
17. Date TBD - Demolish block from new opening
18. Date TBD - Clean/deburr inside edges of new opening
19. Date TBD - Complete relocation of tables/equipment as needed